Skip to main content

Klüber Klüberfluid NH1 4-005 | Schmierstoffe-online.com

Klüber Klüberfluid NH1 4-005 Is a synthetic barrier fluid for mechanical seals.


Your benefits at a glance:


– No build-up of deposits if the product is used according to the intended purpose in mechanical seals due to the advanced synthetic oil formulation
– ISO 21469 certified – supports the compliance with the hygienic requirements in your production plant.


Your requirements – our solution:


Klüberfluid NH1 4-005 is based on a synthetic hydrocarbon oil and was developed for the lubrication of mechanical seals operating under various conditions in the chemical and pharmaceutical industries.

Klüberfluid NH1 4-005 is NSF H1 registered and therefore in compliance with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klüberfluid NH1 4-005 can contribute to increase reliability of your production processes. Nevertheless it is recommended to conduct an additional risk analysis, e.g. HACCP.


Application:


Klüberfluid NH1 4-005 can be used as a barrier fluid in mechanical seals operating under inert gas conditions. Mechanical seals have been used in mixers, driers, mills, kneaders, reactors and pumps in the chemical and the pharmaceutical industry for many years.

Klüber Lubrication offers a range of oils that were especially developed for use as a barrier medium in mechanical seals. The more the seal is stressed in terms of pressure, speed and heat, the lower should the oil’s viscosity be. For naturally circulating barrier fluids, the selected oil viscosity is normally approx. 5 mm²/s, as is the case with Klüberfluid NH1 4-005.

Which type of barrier fluid should be chosen depends on the type of seal elastomer as well as on the application’s process conditions.

For forced circulation, the oil should have a viscosity of 12 – 90 mm²/s. Klüber Lubrication offers solutions also for these cases.

Our experts will be pleased to provide advice.



Application notes:



The recommendations of the mechanical seal manufacturer should be observed.

The stated service temperature range is based on an application under inert gas, as is normally the case with mechanical seals.



Source URL: 

https://www.schmierstoffe-online.com/product/kluber-kluberfluid-nh1-4-005/



Tags: 

Klüber Klüberfluid NH1 4-005, Klüber schmierstoffe, Klüber lubricants, Klüber lubricant, Klüber schmierstoff, Klüber oil, Klüber motor oil, Klüber Brake Fluid, Klüber Fluid


#Lubricants  #MotorOil  #EngineOil  #CrudeOil  #Grease #HydraulicOil  #SyntheticOil  #CarOil  #GearOill  #Oil  #Gas  #HydraulicFluid #BrakeFluid  #RapeseedOil  #TractorOil  #CylinderOil  #Lubricant #Schmierstoffe  #Schmierstoff  #Industrieschmierstoffe  #Fette  #Motoröl #Rohöl  #Mineralöl  #Hydrauliköl  #Getriebeöl  #Petronas  #Kluber  #Meguin  #Castrol

Comments

Popular posts from this blog

FUCHS RENOLIT PU-8-061/2 – Schmierstoffe-online.com

Fuchs RENOLIT PU-8-061/2 is a high-temperature grease. Description: FUCHS  RENOLIT PU-8-061/2 is a semi-synthetic, high-temperature grease containing a special PU-based thickener combination which provides a number of benefits. Outstanding features of RENOLIT PU-8- 061/2 include high thermal stability, low evaporation losses, long-term corrosion protection, good water resistance and optimal lubricity over a wide temperature range. Application: RENOLIT PU-8-061/2 is recommended for the longterm lubrication of plain and roller bearings over a wide temperature range. RENOLIT PU-8-061/2 has a proven record for high temperature applications such as conveyer drives in drying kilns, hot-air blowers, spindle bearings, tumble dryers, black-rubber mixers, paper industry dryers, electric motors, hot air flaps etc. Re-greasing intervals should be matched to the application in question. Advantages: • High thermal stability • Low evaporation loss ...

Why You Should Go for Megol Gearoil Synth ISO VG 220?

What are the essential requirements you need to check when you are looking for high quality lubricants? Well, there are many things you need to take care of, but one of the most important things that you need to look out is the lubrication and wear prevention properties of the lubricants and if you are looking for such properties, just go for Schmierstoffe service’s megol Gearoil Synth ISO VG 220 , an EP lubricant that has all the answers of your questions and are best suitable for your industrial gearboxes and roller and plain bearings. It has excellent wear protection properties as well as good lubricant endurance and specific oil consumption. All you need to do is to just buy it and that is all. Meguin Getriebeoel CLPF 220 is another name you can look forward to when you are looking for EP lubricant with specially stabilized molykote. For best circular lubrication systems, it serves the core purpose. If you are looking for more information on the subject, you can visi...

Fuchs Renolin 504 VDL 100

Fuchs Renolin 504 VDL 100 is an air Compressor Oil and Gas Compressor Oil Description   - FUCHS RENOLIN 500 Series can be used in air compressors and can also be used in compressors working with hydrocarbon gas e.g. natural gas (different composition), propane, propen and process gas. The products of the RENOLIN 500 Series are air compressor oils for piston and rotation compressors according to DIN 51506 Type VDL. The RENOLIN 500 Series is formulated on the basis of especially highly refined base oils; the additives select make possible reliable use at high thermal stress without the formation of damaging residue. Intensified laboratory tests and many years of experience with use confirm the extraordinary oxidation stability of these special compressor oils. Fuchs Renolin 504 VDL 100 is made from highly refined mineral oils and a special additive package that gives this product exceptional oxidation stability under high thermal loads. Fox Re...