Skip to main content

SHELL VSI 8235




Shell VSI 8235 (Concentrate) PROTECTS AGAINST RUSTING IN ENCLOSED VAPOUR SPACES

Shell VSI 8235 (Concentrate) is an oil soluble concentrate that has the ability to protect steel surfaceswhich are above the normal oil level in a system e.g. the vapour spaces in an oil storage tank or the oil reservoir in a circulation system.

PERFORMANCE FEATURES -


·         Shell VSI 8235 (Concentrate) contains polar materials which are both oil soluble and also volatile. Thus, as Shell VSI 8235 (Concentrate) is in circulation, the vapour spaces in a system are continuously kept filled with the VSI vapour which is formed by these inhibitors and this vapour continuously blankets metal surfaces to protect them from corrosion.
·         Shell VSI 8235 (Concentrate) should be added to the lubricant contained in the sump or in the oil tank a few hours before the equipment is stopped. For new pieces of equipment which will be stored after trial, the lubricant/Shell VSI 8235 (Concentrate) mixture could be totally or partially drained out after the trial run provided however, that a small quantity of mixture is kept in the sump. If the oil temperature remains lower than 25°C, the distance between the upper internal surfaces to be protected and the oil level in the machine must be less than two metres.
·         The anti-corrosion performance of the lubricant/Shell VSI 8235 (Concentrate) mixture and the durability of the protection provided are dependent on the degree of ventilation of the system and the oil temperature. The performance can be improved by raising the oil temperature before stopping the equipment and by sealing the vents of the machine concerned.
·         The internal protection of large oil tanks will be improved by brushing or spraying the surfaces to be protected with the lubricant/Shell VSI 8235 (Concentrate) mixture.
·         Shell VSI 8235 (Concentrate) has no detrimental effects on the individual and special properties of the lubricant to which it is added. The mixture can be used as the service lubricant when the equipment is returned to or put in operation.


WHEN SHELL VSI 8235 (CONCENTRATE) IS USED AT 2% VOLUME SOLUTION IN THE SYSTEM OIL OF EQUIPMENT TO BE PROTECTED, IT:

·         Enhances the anti-corrosion performance of the lubricant it is added to.
·         Provides corrosion protection of enclosed spaces above the lubricant level by blanketing the metal surfaces to be protected by means of volatile corrosion inhibitors.






APPLICATIONS -


Shell VSI 8235 (Concentrate) is an oil soluble concentrate that has the ability to protect steel surfaces which are above the normal oil level in a system – the vapour spaces in an oil storage tank or the oil reservoir in a circulation system would be examples.

Shell VSI 8235 (Concentrate) is recommended for use in all enclosed oil lubrication systems where rusting is likely to occur because of the presence of steam condensate or atmospheric moisture in the system.

TYPICAL APPLICATIONS ARE – 

 

·         Oil lubricated rolling bearing and gear housings, reservoirs, oil piping, and similar circulation system components.
·         Machine tool housings where the machines may be idle over a weekend or for even longer periods of time.
·         Steam turbine lubrication systems where corrosion of oil gravity tanks or oil storage tank walls and overheads is occurring.
·         Any machinery that is actually idle or in intermittent use and which is therefore susceptible to rusting because the oil in use gradually drains down from internal surfaces.

RECOMMENDED DOSAGE –

 


Shell VSI 8235 (Concentrate) is recommended for use at 2% volume solution and is added to the existing oil already in the equipment.
It should not be used at higher concentrations as this may result in equipment damage.

Looking for any other product in SHELL ENGINE OIL & LUBRICANTS or other Schmierstoffe? Just give us a call.

Looking for any other Schmierstoffe product in MEGUIN LUBRICANTS or other Lubricant ? Just give us a call.

Source URL -
https://www.schmierstoffe-online.com/product/shell-vsi-8235-concentrate/


 Email: info@dm-schmierstoffservice.de
 Contact No: +49 8106 3978728

#Lubricants #MotorOil #EngineOil #CrudeOil #Grease #HydraulicOil #SyntheticOil #CarOil #GearOill #Oil #Gas #HydraulicFluid #BrakeFluid #RapeseedOil #TractorOil #CylinderOil #Lubricant #IndustrialLubricants #Fat #MineralOil #TransmissionOil #Petronas #Kluber #Meguin #Castrol


Comments

Post a Comment

Popular posts from this blog

ARAL Degol BMB 1200

ARAL Degol BMB 1200 is gear oil type CLPF Recommended Use   - Aral Degol BMB 1200 is a high-performance gear oil with solid lubricant additives (molybdenum disulfide / MoS2). This oil complies with the requirements of DIN 51517-3, and is marked according to DIN 51502 as transmission oil type CLPF. The type and proportion of the MoS2, which is particularly stable, are specially adapted to the base oil and the other additives. Thus, highest efficiency can be achieved over a wide load range. Noteworthy features of this gear oil are in addition to the neutrality towards non-ferrous metals and seals a high thermal stability, good aging resistance and an extremely good corrosion protection. Application   - Aral Degol BMB 1200 is predestined for use in slow-running heavy-duty drives and under heavy shock and vibration loads. It ensures lubrication even if the reaction layers, which have been formed by chemically dissolved active subs...
Post a Comment
Read more

Klüber Hotemp Super N Plus

Klüber Hotemp Super N Plus is a special high-temperature oil for continuous wood panel presses Benefits For Your Application   - – Reduced energy consumption and improved efficiency due to advanced additives, even at very high temperatures – No lacquer-like residues formed under continuous total loss lubrication conditions – Low evaporation losses with reduced oil consumption and fume formation – Good adhesion and spreading properties, minimised contamination risk and effective lubricant supply to all friction points Description   - HOTEMP SUPER N PLUS is a special high-temperature oil for use on the latest generation of continuous board presses subject to highest process temperatures and speeds. HOTEMP SUPER N PLUS is an advanced product based on the HOTEMP…series with further development in terms of evaporation losses at temperatures between 230 and 260 °C. No lacquer-like residues are formed under continuous total loss lubrication condition...
Post a Comment
Read more

Mobil Mobilmet 443

MOBIL MOBILMET 443 is a High Performance Oil-Based Cutting Fluids Product Description   - Mobilmet 440 Series fluids are high performance, multi-service, non-corrosive straight cutting fluids. They are designed for moderate to heave duty cutting operations. They are also suitable for machine tool lubrication and use as hydraulic fluids in specific applications. They are formulated from high quality base oils and chlorine-free additives to provide effective machine performance in a wide variety of moderate to severe operations. They are non-staining to both ferrous and non-ferrous metals during machining. Mobilet 440 Series fluids are formulated to prevent the formation of oil mist in the vicinity of the machine tool, thus contributing to a safer and more pleasant working environment. Features and Benefits   - Mobilmet 440 Series Fluids are designed for a very wide variety of non-corrosive cutting and machining operations that range from moderate ...
Post a Comment
Read more