Skip to main content

Fuchs Titan GT 1 PRO V 0W-20




Fuchs Titan GT 1 PRO V 0W-20 Is a premium performance Engine Oil
Fuchs Titan GT 1 PRO V 0W-20 is a Premium Performance Engine Oil with new XTL-Technology in ground-breaking viscosity class. Specially designed for modern VOLVO vehicles, for extreme fuel-economy characteristics and reduced CO2 emissions. Excellent cold staring behaviour, very fast oil circulation and outstanding performance reserves.


Description  -

Fuchs TITAN GT1 PRO V SAE 0W-20 is an innovative low viscosity engine oil. The unique formulation based on XTL-Technology in conjunction with the further developed FUCHS additive technology provides the superior engine oil TITAN GT1 PRO V SAE 0W-20. Today’s highly stressed systems and engines with Stop-Start-Systems make high demands on the lubrication. The unique XTL-Technology offers superior wear protection and performance reserves in spite of the low viscosity class. Significant improvements in fuel economy and CO2 emissions where achieved by lowering the dynamic viscosity and utilising new additive technology of TITAN GT1 PRO V SAE 0W-20.


Application  -

Fuchs TITAN GT1 PRO V SAE 0W-20 has been specially developed and approved for use in the new VOLVO VEA (Volvo Engine Architecture) engine generation. TITAN GT1 PRO V SAE 0W-20 is suitable for gasoline and Diesel engines requiring the Volvo VCC RBS0-2AE specification. Certain engines of the VEA engine generation may only be filled with lubricants according to the new Volvo VCC RBS0-2AE 0W-20 specification. TITAN GT1 PRO V SAE 0W-20 is miscible and compatible with conventional branded engine oils. However, mixing with other engine oils should be avoided in order to fully utilize the product’s benefits. A complete oil change is recommended
when switching to TITAN GT1 PRO V SAE 0W-20. For information on product safety and proper disposal please refer to the latest Material Safety Data Sheet.


Advantages/Benefits  -

• Excellent cold starting behaviour  very fast oil circulation even at extremely low temperatures due to XTL
• Lower fuel consumption (up to 3,9% in the M111 FE test) and less CO2 emissions due to XTL
• Lower oil consumption offered by XTL-Technology in spite of the low viscosity class SAE 0W-20
• Extreme shear stability
• Can be used for extended drain intervals
• Outstanding ageing stability due to XTL-Technology
• Best wear protection at all operating conditions
• The viscosity class has been specially adjusted to fulfil the requirements of Volvo
• Specially developed to fulfil the new Volvo VCC RBS0-2AE specification (Gasoline and Diesel engines) and approved by Volvo!




Specifications  -


• ACEA A1/B1
Approvals
• VOLVO VCC RBS0-2AE
FUCHS Recommendations
• –

Looking for any other schmierstoffe product in FUCHS Lubricants or other Lubricant ? Just give us a call.

Source URL: 
https://www.schmierstoffe-online.com/product/fuchs-titan-gt-1-pro-v-0w-20/

Email: info@dm-schmierstoffservice.de
Contact No: +49 8106 3978728
Tags:
Fuchs Titan GT 1 PRO V 0W-20, Fuchs schmierstoffe, Fuchs lubricants, Fuchs lubricant, Fuchs schmierstoff, Fuchs oil, Fuchs motor oil, Fuchs Brake Fluid, Fuchs Fluid

#Lubricants #MotorOil #EngineOil #CrudeOil #Grease #HydraulicOil #SyntheticOil #CarOil #GearOill #Oil #Gas #HydraulicFluid #BrakeFluid #RapeseedOil #TractorOil #CylinderOil #Lubricant #IndustrialLubricants #Fette #MineralOil #TransmissionOil #Petronas #Kluber #Meguin #Castrol


Labels:

Comments

Post a Comment

Popular posts from this blog

ARAL Degol BMB 1200

ARAL Degol BMB 1200 is gear oil type CLPF Recommended Use   - Aral Degol BMB 1200 is a high-performance gear oil with solid lubricant additives (molybdenum disulfide / MoS2). This oil complies with the requirements of DIN 51517-3, and is marked according to DIN 51502 as transmission oil type CLPF. The type and proportion of the MoS2, which is particularly stable, are specially adapted to the base oil and the other additives. Thus, highest efficiency can be achieved over a wide load range. Noteworthy features of this gear oil are in addition to the neutrality towards non-ferrous metals and seals a high thermal stability, good aging resistance and an extremely good corrosion protection. Application   - Aral Degol BMB 1200 is predestined for use in slow-running heavy-duty drives and under heavy shock and vibration loads. It ensures lubrication even if the reaction layers, which have been formed by chemically dissolved active subs...
Post a Comment
Read more

Mobil Mobilmet 443

MOBIL MOBILMET 443 is a High Performance Oil-Based Cutting Fluids Product Description   - Mobilmet 440 Series fluids are high performance, multi-service, non-corrosive straight cutting fluids. They are designed for moderate to heave duty cutting operations. They are also suitable for machine tool lubrication and use as hydraulic fluids in specific applications. They are formulated from high quality base oils and chlorine-free additives to provide effective machine performance in a wide variety of moderate to severe operations. They are non-staining to both ferrous and non-ferrous metals during machining. Mobilet 440 Series fluids are formulated to prevent the formation of oil mist in the vicinity of the machine tool, thus contributing to a safer and more pleasant working environment. Features and Benefits   - Mobilmet 440 Series Fluids are designed for a very wide variety of non-corrosive cutting and machining operations that range from moderate ...
Post a Comment
Read more

Klüber Hotemp Super N Plus

Klüber Hotemp Super N Plus is a special high-temperature oil for continuous wood panel presses Benefits For Your Application   - – Reduced energy consumption and improved efficiency due to advanced additives, even at very high temperatures – No lacquer-like residues formed under continuous total loss lubrication conditions – Low evaporation losses with reduced oil consumption and fume formation – Good adhesion and spreading properties, minimised contamination risk and effective lubricant supply to all friction points Description   - HOTEMP SUPER N PLUS is a special high-temperature oil for use on the latest generation of continuous board presses subject to highest process temperatures and speeds. HOTEMP SUPER N PLUS is an advanced product based on the HOTEMP…series with further development in terms of evaporation losses at temperatures between 230 and 260 °C. No lacquer-like residues are formed under continuous total loss lubrication condition...
Post a Comment
Read more