Fuchs Titan Universal HD 40

Fuchs Titan Universal HD 40 Is a monograde engine oil for diesel and gasoline engines

Fuchs Titan Universal HD 40 is a High Performance monograde oils for gasoline and diesel engines. Specially developed for off-road vehicles. Depending upon manufacturer regulation also in other aggregates applicable.

Description -

FUCHS TITAN UNIVERSAL HD 40 is used for the necessary streamlining of lubricants, above all for vehicle and equipment fleets. The right engine oil is available with TITAN UNIVERSAL HD 40. Whether continuously at full throttle or in STOP and GO operation, TITAN UNIVERSAL HD 40 protects against wear, deposits and corrosion all the time with the lowest oil consumption. Another important point for use in practice: engines lubricated with TITAN UNIVERSAL HD 40 have no sacrifices in performance because of unallowable deposits in the combustion chambers. TITAN UNIVERSAL HD 40 provides for proper function of hydraulic valve lifters (hydraulic valve compensation) even during extended oil change intervals.

Application -

Under normal usage conditions, in properly maintained engines, the performance capability of the TITAN
UNIVERSAL HD 40 additives makes possible oil and filter change intervals up to 30,000 km and/or 500 operating
hours. We will be happy to provide information on the possible programming of oil and filter change intervals for
specific cases. The viscosity recommendations on page 3 have been tested for Central European climate conditions;
please note the manufacturer’s viscosity recommendations. TITAN UNIVERSAL HD 40 is miscible and compatible with conventional branded engine oils. However, mixing with other engine oils should be avoided
in order to fully utilize the product’s benefits. A complete oil change is recommended when converting to TITAN
UNIVERSAL HD 40. For information on product safety and proper disposal please refer to the latest Material Safety Data Sheet.

Advantages/Benefits -

· No residue in the combustion chambers, on valve and piston or on exhaust gas turbines of turbochargers

· active over the long term and makes possible the full utilization of the oil and filter change intervals

· offers the lowest oil consumption

Approvals -

· DEUTZ DQC I-02

· MB-APPROVAL 228.2

· MB-APPROVAL 235.12

· MTU DDC TYPE 2

· ZF TE-ML 04B (ZF001190)

Fuchs Recommendations -

· ACEA E2

· API CF-2/CF-4/S

· MIL-L-2104 D

· ALLISON C-4

· CAT TO-2

· MAN 270

· ZF TE-ML 02C

Looking for any other schmierstoffe product in Kluber Lubrication or other Lubricant ? Just give us a call.

Source URL:

https://www.schmierstoffe-online.com/product/fuchs-titan-universal-hd-40/

Email: info@dm-schmierstoffservice.de

Contact No: +49 8106 3978728

Tags:

Fuchs Titan Universal HD 40, Fuchs schmierstoffe, Fuchs lubricants, Fuchs lubricant, Fuchs schmierstoff, Fuchs oil, Fuchs motor oil, Fuchs Brake Fluid, Fuchs Fluid

#Lubricants #MotorOil #EngineOil #CrudeOil #Grease #HydraulicOil #SyntheticOil #CarOil #GearOill #Oil #Gas #HydraulicFluid #BrakeFluid #RapeseedOil #TractorOil #CylinderOil #Lubricant #IndustrialLubricants #Fette #MineralOil #TransmissionOil #Petronas #Kluber #Meguin #Castrol

Fuchs Referenzfluessigkeit IRM 903

Fuchs Referenzfluessigkeit IRM 903 is a reference oil, IRM REFERENCE OILS per ASTM D 471-06 Description - The ASTM standard test method D 471-06 deals with the effect of liquids on elastomers (“Rubber Property – Effect of Liquids”). Besides describing the procedures for various elastomer tests, it lists standard test liquids with which reference measurements can be performed. The ASTM D 471-06 method divides the standard test liquids into three groups: · IRM reference oils · ASTM reference fuels · ASTM service liquids IRM Reference oils - The reference oils listed under IRM — IRM 901, IRM 902 and IRM 903 — are mineral oils with different paraffin and aromatic concentrations. Basically, the effect on elastomers increases as the content of aromatics increases (swelling behaviour). ...

Mobil Mobilmet 443

MOBIL MOBILMET 443 is a High Performance Oil-Based Cutting Fluids Product Description - Mobilmet 440 Series fluids are high performance, multi-service, non-corrosive straight cutting fluids. They are designed for moderate to heave duty cutting operations. They are also suitable for machine tool lubrication and use as hydraulic fluids in specific applications. They are formulated from high quality base oils and chlorine-free additives to provide effective machine performance in a wide variety of moderate to severe operations. They are non-staining to both ferrous and non-ferrous metals during machining. Mobilet 440 Series fluids are formulated to prevent the formation of oil mist in the vicinity of the machine tool, thus contributing to a safer and more pleasant working environment. Features and Benefits - Mobilmet 440 Series Fluids are designed for a very wide variety of non-corrosive cutting and machining operations that range from moderate ...

SHELL VSI 8235

Shell VSI 8235 (Concentrate) PROTECTS AGAINST RUSTING IN ENCLOSED VAPOUR SPACES Shell VSI 8235 (Concentrate) is an oil soluble concentrate that has the ability to protect steel surfaceswhich are above the normal oil level in a system e.g. the vapour spaces in an oil storage tank or the oil reservoir in a circulation system. PERFORMANCE FEATURES - · Shell VSI 8235 (Concentrate) contains polar materials which are both oil soluble and also volatile. Thus, as Shell VSI 8235 (Concentrate) is in circulation, the vapour spaces in a system are continuously kept filled with the VSI vapour which is formed by these inhibitors and this vapour continuously blankets metal surfaces to protect them from corrosion. · Shell VSI 8235 (Concentrate) should be added to the lubricant contained in the sump or in the oil tank a few hours before the equipment is stopped. For new p...

Schmierstoffe Online Blog Deutschland

Search This Blog