Skip to main content

AeroShell Turbine Oil 560




AeroShell Turbine Oil 560 is a third generation, high performance, low coking 5 mm 2 /s synthetic hindered ester oil incorporating a carefully selected and finely balanced combination of additives to improve thermal and oxidation stability.


Main Applications  -


·         Changes which have taken place over the last twenty years in engine performance (in terms of improved fuel consumption, higher operating temperatures and pressures) and maintenance practices have resulted in increased severity in lubricant operating conditions.
·         AeroShell Turbine Oil 560 was developed to withstand the hostile environments of today’s high powered, high compression engines in which the older generation of oils can be stressed up to and beyond their thermal limits, as evidenced by oil coking in the high temperature bearing areas.
·         By overcoming the problems associated with using old technology oils in new technology engines, AeroShell Turbine Oil 560:
·         maintains a cleaner engine
·         provides improved load carrying capacity
·         reduces maintenance costs
·         prolongs bearing life in both new and existing engines.
·         In order for military authorities to take advantage of this better performance in military engines the specification MIL-PRF- 23699 was re-written to include a “High Thermal Stability” (HTS) grade as well as the Standard (STD) and Corrosion Inhibited (C/I) grades. AeroShell Turbine Oil 560 is fully approved as an HTS oil. With the advent of the new civil turbine oil specification, SAE AS5780, which has more stringent requirements than the military specification, AeroShell Turbine Oil 560 was approved as a SPC (Standard Performance Capability) oil.
·         With effect from January 1st 2002, AeroShell Turbine Oil 560 has been manufactured with an improved formulation to further enhance its anti-coking performance.
·         AeroShell Turbine Oil 560 contains a synthetic ester oil and should not be used in contact with incompatible seal materials and it also affects some paints and plastics.




Specifications, Approvals & Recommendations  -


·         Approved MIL – PRF -23699G Grade HTS (US) Approved SAE AS5780B Grade SPC
·         Equivalent DEF STAN 91-101 (British)
·         Equivalent DCSEA 299/A (French)
·         Analogue to VNII NP 50-1-4F, B3V, LZ-240, VNII NP 50-1-4U and 36/Ku-A (Russian)
·         NATO Code O-154
·         Joint Service Designation : Equivalent OX-27
·         Pratt & Whitney : Approved 521C Type II
·         General Electric : Approved D-50 TF1
·         Allison : Approved EMS-53 (Obsolete)
·         COMAC Approved to QPL-CMS-OL-202
·         AeroShell Turbine Oil 560 is approved for use in all models of the following engines:
·         Honeywell : TFE 731, TPE 331, APUs (majority of models), LTS 101, LTP 101, ALF 502, LF 507, AS907, AS977, GTCP 30, 36, 85, 331, 660, RE220
·         Allison (Rolls-Royce) : 250 Series
·         BMW – Rolls-Royce : BR710, BR715
·         CFM International : CFM 56 (all models)
·         CFE 738
·         Engine Alliance: GP7200
·         GE 90, CF6 (all models), CJ610, CF700, CT34, GEnX
·         IAE : V2500 Series
·         IHI : FJR 710
·         Hamilton Sundstrand : APS 500, 1000, 2000, 3000
·         Pratt & Whitney : JT3D, JT8D, JT9D, PW4000 Series (cleared for flight evaluation in PW2000 engines)
·         Pratt & Whitney Canada : PT6T, PT6A (some models only), PW120,121 Series, JT15D, PW200 Series, PW300 Series, PW500 Series, PW901A APU
·         Rolls-Royce : Spey, Tay RB183, Adour, RB199
·         Turbomeca : Arriel, Arrius, Makila, RTM 322, TM 319, TM 333, TP 319, MTR 390, various models of Astazou and Artouste engines
·         Full details of the approval status of AeroShell Turbine Oil 560 in APUs and other engines/accessories is available.


Suchen Sie nach einem anderen Produkt in AEROSHELL Schmierstoffe oder anderen Schmierstoffe ? Rufen Sie uns einfach an.

Source URL: 
https://schmierstoffe-dm.de/product/aeroshell-turbine-oil-560/

Email: info@dm-schmierstoffservice.de
Contact No: +49 8106 3978728

Tags:

AeroShell Turbine Oil 560,Aeroshell schmierstoffe, Aeroshell lubricants, Aeroshell lubricant, Aeroshell schmierstoff, Aeroshell oil, Aeroshell motor oil, Aeroshell Brake Fluid, Aeroshell Fluid


#Lubricants #MotorOil #EngineOil #CrudeOil #Grease #HydraulicOil #SyntheticOil #CarOil #GearOill #Oil #Gas #HydraulicFluid #BrakeFluid #RapeseedOil #TractorOil #CylinderOil #Lubricant #IndustrialLubricants #Fette #MineralOil #TransmissionOil #Petronas #Kluber #Meguin #Castrol

Labels:

Comments

Post a Comment

Popular posts from this blog

ARAL Degol BMB 1200

ARAL Degol BMB 1200 is gear oil type CLPF Recommended Use   - Aral Degol BMB 1200 is a high-performance gear oil with solid lubricant additives (molybdenum disulfide / MoS2). This oil complies with the requirements of DIN 51517-3, and is marked according to DIN 51502 as transmission oil type CLPF. The type and proportion of the MoS2, which is particularly stable, are specially adapted to the base oil and the other additives. Thus, highest efficiency can be achieved over a wide load range. Noteworthy features of this gear oil are in addition to the neutrality towards non-ferrous metals and seals a high thermal stability, good aging resistance and an extremely good corrosion protection. Application   - Aral Degol BMB 1200 is predestined for use in slow-running heavy-duty drives and under heavy shock and vibration loads. It ensures lubrication even if the reaction layers, which have been formed by chemically dissolved active subs...
Post a Comment
Read more

Klüber Hotemp Super N Plus

Klüber Hotemp Super N Plus is a special high-temperature oil for continuous wood panel presses Benefits For Your Application   - – Reduced energy consumption and improved efficiency due to advanced additives, even at very high temperatures – No lacquer-like residues formed under continuous total loss lubrication conditions – Low evaporation losses with reduced oil consumption and fume formation – Good adhesion and spreading properties, minimised contamination risk and effective lubricant supply to all friction points Description   - HOTEMP SUPER N PLUS is a special high-temperature oil for use on the latest generation of continuous board presses subject to highest process temperatures and speeds. HOTEMP SUPER N PLUS is an advanced product based on the HOTEMP…series with further development in terms of evaporation losses at temperatures between 230 and 260 °C. No lacquer-like residues are formed under continuous total loss lubrication condition...
Post a Comment
Read more

Mobil Mobilmet 443

MOBIL MOBILMET 443 is a High Performance Oil-Based Cutting Fluids Product Description   - Mobilmet 440 Series fluids are high performance, multi-service, non-corrosive straight cutting fluids. They are designed for moderate to heave duty cutting operations. They are also suitable for machine tool lubrication and use as hydraulic fluids in specific applications. They are formulated from high quality base oils and chlorine-free additives to provide effective machine performance in a wide variety of moderate to severe operations. They are non-staining to both ferrous and non-ferrous metals during machining. Mobilet 440 Series fluids are formulated to prevent the formation of oil mist in the vicinity of the machine tool, thus contributing to a safer and more pleasant working environment. Features and Benefits   - Mobilmet 440 Series Fluids are designed for a very wide variety of non-corrosive cutting and machining operations that range from moderate ...
Post a Comment
Read more