Skip to main content

Aeroshell Oil W80 Plus




AeroShell Oil W80 Plus is a new single grade oil that combines the single grade, ashless dispersant performance found in AeroShell Oil W80 Plus and the anti-wear/anti-corrosion additives of Aeroshell Oil W15W-50 Multigrade. It is the oil for pilots who prefer a single grade but who also want the extra protection and performance.


Performance, Features & Benefits  -

·         Blended from selected high viscosity mineral base oils.
·         Contains AeroShell’s proven W Oils additive package.
·         Additional anti-wear additives (containing Lycoming additive LW 16702).
·         Additional anti-corrosion additives.
·         Fully compatible with other approved aircraft piston engine oils.


Main Applications  -


·         The advanced additives in AeroShell Oil W80 Plus provide better rust and wear protection than conventional single grades. The additives work as a protective barrier to prevent critical parts from being slowly degraded by rust or wear, especially when an aircraft sits idle. This protection helps keep the camshaft and lifters coated, reducing the likelihood of premature damage and helping operators reach TBO.



Specifications, Approvals & Recommendations  -


·         Approved SAE J-1899 SAE Grade 40
·         Aeroshell Oil W80 Plus already contains, in the correct proportions, an anti-wear additive equivalent to the Lycoming additive LW 16702; thus complying with FAA Airworthiness Directive 80-04-03. Operators who use Aeroshell Oil W80 Plus DO NOT need to add this Lycoming additive to the oil.
·         Aeroshell Oil W80 Plus is qualified for use in all Continental Motors liquid cooled and air cooled aircraft piston engines.
·         Textron Lycoming : 301F, Service Bulletins 446E and 471B, Service Instruction 1409C
·         Continental : SIL 99-2
·         FAA : Airworthiness Directive 80-04-03 R2


Looking for any other schmierstoffe product in AEROSHELL LUBRICANTS or other Lubricant ? Just give us a call.

Source URL: 
https://www.schmierstoffe-online.com/product/aeroshell-oil-w80-plus/

Email: info@dm-schmierstoffservice.de
Contact No: +49 8106 3978728

Tags:
Aeroshell Oil W80 Plus,Aeroshell schmierstoffe, Aeroshell lubricants, Aeroshell lubricant, Aeroshell schmierstoff, Aeroshell oil, Aeroshell motor oil, Aeroshell Brake Fluid, Aeroshell Fluid

#Lubricants #MotorOil #EngineOil #CrudeOil #Grease #HydraulicOil #SyntheticOil #CarOil #GearOill #Oil #Gas #HydraulicFluid #BrakeFluid #RapeseedOil #TractorOil #CylinderOil #Lubricant #IndustrialLubricants #Fette #MineralOil #TransmissionOil #Petronas #Kluber #Meguin #Castrol


Labels:

Comments

Post a Comment

Popular posts from this blog

ARAL Degol BMB 1200

ARAL Degol BMB 1200 is gear oil type CLPF Recommended Use   - Aral Degol BMB 1200 is a high-performance gear oil with solid lubricant additives (molybdenum disulfide / MoS2). This oil complies with the requirements of DIN 51517-3, and is marked according to DIN 51502 as transmission oil type CLPF. The type and proportion of the MoS2, which is particularly stable, are specially adapted to the base oil and the other additives. Thus, highest efficiency can be achieved over a wide load range. Noteworthy features of this gear oil are in addition to the neutrality towards non-ferrous metals and seals a high thermal stability, good aging resistance and an extremely good corrosion protection. Application   - Aral Degol BMB 1200 is predestined for use in slow-running heavy-duty drives and under heavy shock and vibration loads. It ensures lubrication even if the reaction layers, which have been formed by chemically dissolved active subs...
Post a Comment
Read more

Klüber Hotemp Super N Plus

Klüber Hotemp Super N Plus is a special high-temperature oil for continuous wood panel presses Benefits For Your Application   - – Reduced energy consumption and improved efficiency due to advanced additives, even at very high temperatures – No lacquer-like residues formed under continuous total loss lubrication conditions – Low evaporation losses with reduced oil consumption and fume formation – Good adhesion and spreading properties, minimised contamination risk and effective lubricant supply to all friction points Description   - HOTEMP SUPER N PLUS is a special high-temperature oil for use on the latest generation of continuous board presses subject to highest process temperatures and speeds. HOTEMP SUPER N PLUS is an advanced product based on the HOTEMP…series with further development in terms of evaporation losses at temperatures between 230 and 260 °C. No lacquer-like residues are formed under continuous total loss lubrication condition...
Post a Comment
Read more

Mobil Mobilmet 443

MOBIL MOBILMET 443 is a High Performance Oil-Based Cutting Fluids Product Description   - Mobilmet 440 Series fluids are high performance, multi-service, non-corrosive straight cutting fluids. They are designed for moderate to heave duty cutting operations. They are also suitable for machine tool lubrication and use as hydraulic fluids in specific applications. They are formulated from high quality base oils and chlorine-free additives to provide effective machine performance in a wide variety of moderate to severe operations. They are non-staining to both ferrous and non-ferrous metals during machining. Mobilet 440 Series fluids are formulated to prevent the formation of oil mist in the vicinity of the machine tool, thus contributing to a safer and more pleasant working environment. Features and Benefits   - Mobilmet 440 Series Fluids are designed for a very wide variety of non-corrosive cutting and machining operations that range from moderate ...
Post a Comment
Read more