Skip to main content

Castrol Aircol HV 100



Castrol Aircol HV 100 is a Vacuum Pump Oil


Description  -

Castrol Aircol™ HV 100 is really just a special vacuum pump acrylic using a narrow boiling range for mechanically delicate and high vacuum pumps.
 Aircol HV 100 is devised with a center portion of a paraffin based solvent raffinate, combined with a very high boiling point, a vapor pressure together with a very low vaporization loss and also a minimal coking tendency.  Aircol HV 100 comes with a foaming tendency and water separation behavior. 
Application  -


Aircol HV 100 is devised for the use in mechanical vacuum pumps, that work in Higher vacuum area and fine vacuum to
About 0,0001 mbar.  The system has proven reliable in rotary valve pumps, rotary piston pumps and piston pumps that were rotating.  Aircol HV 100 can be used for its initial meeting of pumps by manufacturers of repute.
Common Characteristics  -

·         ISO-VG DIN 51519 – 100
·         Density at 15°C DIN 51757 g/ml 0.880
·         Viscosity in 40°C DIN 51562 mm²/s 95
·         At 100°C DIN 51562 millimeter ²/s 10.7
·         Oxide Ash DIN EN ISO 6245%             

Get in touch with us of all schmierstoff related needs and much more.



Source URL -
https://www.schmierstoffe-online.com/product/castrol-aircol-hv-100/



Email: info@dm-schmierstoffservice.de
Contact No: +49 8106 3978728
Tags:
Castrol Aircol HV 100 ,Castrol schmierstoffe, Castrol lubricants, Castrol lubricant, Castrol schmierstoff, Castrol oil, Castrol motor oil, Castrol Brake Fluid, Castrol Fluid

#Lubricants #MotorOil #EngineOil #CrudeOil #Grease #HydraulicOil #SyntheticOil #CarOil #GearOill #Oil #Gas #HydraulicFluid #BrakeFluid #RapeseedOil #TractorOil #CylinderOil #Lubricant #IndustrialLubricants #Fette #MineralOil #TransmissionOil #Petronas #Kluber #Meguin #Castrol
                                        

Labels:

Comments

Post a Comment

Popular posts from this blog

ARAL Degol BMB 1200

ARAL Degol BMB 1200 is gear oil type CLPF Recommended Use   - Aral Degol BMB 1200 is a high-performance gear oil with solid lubricant additives (molybdenum disulfide / MoS2). This oil complies with the requirements of DIN 51517-3, and is marked according to DIN 51502 as transmission oil type CLPF. The type and proportion of the MoS2, which is particularly stable, are specially adapted to the base oil and the other additives. Thus, highest efficiency can be achieved over a wide load range. Noteworthy features of this gear oil are in addition to the neutrality towards non-ferrous metals and seals a high thermal stability, good aging resistance and an extremely good corrosion protection. Application   - Aral Degol BMB 1200 is predestined for use in slow-running heavy-duty drives and under heavy shock and vibration loads. It ensures lubrication even if the reaction layers, which have been formed by chemically dissolved active subs...
Post a Comment
Read more

Klüber Hotemp Super N Plus

Klüber Hotemp Super N Plus is a special high-temperature oil for continuous wood panel presses Benefits For Your Application   - – Reduced energy consumption and improved efficiency due to advanced additives, even at very high temperatures – No lacquer-like residues formed under continuous total loss lubrication conditions – Low evaporation losses with reduced oil consumption and fume formation – Good adhesion and spreading properties, minimised contamination risk and effective lubricant supply to all friction points Description   - HOTEMP SUPER N PLUS is a special high-temperature oil for use on the latest generation of continuous board presses subject to highest process temperatures and speeds. HOTEMP SUPER N PLUS is an advanced product based on the HOTEMP…series with further development in terms of evaporation losses at temperatures between 230 and 260 °C. No lacquer-like residues are formed under continuous total loss lubrication condition...
Post a Comment
Read more

Mobil Mobilmet 443

MOBIL MOBILMET 443 is a High Performance Oil-Based Cutting Fluids Product Description   - Mobilmet 440 Series fluids are high performance, multi-service, non-corrosive straight cutting fluids. They are designed for moderate to heave duty cutting operations. They are also suitable for machine tool lubrication and use as hydraulic fluids in specific applications. They are formulated from high quality base oils and chlorine-free additives to provide effective machine performance in a wide variety of moderate to severe operations. They are non-staining to both ferrous and non-ferrous metals during machining. Mobilet 440 Series fluids are formulated to prevent the formation of oil mist in the vicinity of the machine tool, thus contributing to a safer and more pleasant working environment. Features and Benefits   - Mobilmet 440 Series Fluids are designed for a very wide variety of non-corrosive cutting and machining operations that range from moderate ...
Post a Comment
Read more