Klüber Hotemp Super
N Plus is a special high-temperature oil for continuous wood panel presses
Benefits For Your Application -
– Reduced energy
consumption and improved efficiency due to advanced additives, even at very
high temperatures
– No lacquer-like residues formed under continuous total loss lubrication conditions
– Low evaporation losses with reduced oil consumption and fume formation
– Good adhesion and spreading properties, minimised contamination risk and effective lubricant supply to all friction points
– No lacquer-like residues formed under continuous total loss lubrication conditions
– Low evaporation losses with reduced oil consumption and fume formation
– Good adhesion and spreading properties, minimised contamination risk and effective lubricant supply to all friction points
Description
-
HOTEMP SUPER N PLUS is
a special high-temperature oil for use on the latest generation of continuous board
presses subject to highest process temperatures and speeds. HOTEMP SUPER N PLUS
is an advanced product based on the HOTEMP…series with further development in
terms of evaporation losses at temperatures between 230 and 260 °C. No
lacquer-like residues are formed under continuous total loss lubrication
conditions. The special additives contained in HOTEMP SUPER N PLUS ensure
good wear protection, spreading properties and stable lubricating film
generation.
Application
-
For use in continuous
belt presses manufacturing fibreboard, such as particle, MDF, HDF, OSB or LVL
boards.
The product has been designed especially for use in the following systems:
The product has been designed especially for use in the following systems:
ContiRoll® of Messrs.
Siempelkamp Conti-Panel-System of Messrs. Dieffenbacher küsters
press®/contipressTM of Messrs. Metso/Küsters Complex lubrication points in the
heating and compression area are:
– steel belts, roller
rod carpets, heating platens
– roller bar chains
– contact-pressure and alignment chains or
– steel belts, beds of special roller chains, heating platens
– roller bar chains
– contact-pressure and alignment chains or
– steel belts, beds of special roller chains, heating platens
The friction points,
i.e. steel belts & roller rods, are fully exposed to heating and
compression temperatures. Chains are exposed to radiant heat typically at
temperatures of 160 °C to 190 °C.
The other chains, pins
and bending rods are lubricated with other HOTEMP SUPER products depending on
machine design and operating conditions.
Application Notes
-
According to the
experience we gained on our test rigs and in practice, HOTEMP SUPER N PLUS does
not form any lacquerlike residues when properly applied, i.e. if belts, roller
bars, chains and slide rails are always covered with an oil film.
However, extremely
high temperatures in combination with insufficient lubrication may lead to the
formation of powdery residues. When applying fresh oil in time, such residues
will be regenerated and ensure proper lubricant supply to the friction points.
Looking for any other
product in Kluber
Lubrication or other Lubricant ?
Just give us a call.
Source URL:
Email: info@dm-schmierstoffservice.de
Contact No: +49 8106 3978728
Tags:
Klüber Hotemp
Super N Plus,Kluber schmierstoffe, Kluber lubricants, Kluber lubricant, Kluber
schmierstoff, Kluber oil, Kluber motor oil, Kluber Brake Fluid, Kluber Fluid
#Lubricants #MotorOil #EngineOil #CrudeOil #Grease
#HydraulicOil #SyntheticOil #CarOil #GearOill #Oil #Gas #HydraulicFluid
#BrakeFluid #RapeseedOil #TractorOil #CylinderOil #Lubricant
#IndustrialLubricants #Fette #MineralOil #TransmissionOil #Petronas #Kluber
#Meguin #Castrol
Comments
Post a Comment