Skip to main content

Castrol Alphasyn GS 220



Castrol Alphasyn GS 220 Is a fully synthetic gear lubricant.

Castrol Alphasyn GS 220 is a Synthetic Gear Oil.

 

Description  -

Castrol Alphasyn™ GS are fully synthetic gear lubricants based on carefully selected polyglycol fluids and containing antioxidant, rust-inhibiting and EP additives of high thermal stability.

Application  -

The Alphasyn GS range has inherently superior properties relative to mineral lubricants, therefore these grades are especially suitable for the high temperature lubrication of gears and bearings,particularly in large scale mills and calenders.
In worm gears operating with mineral oil at low speeds and high torques, conditions of boundary lubrication tend to promote pitting and consequent rapid wear of bronze worm-wheels. Fatty oils (also known as compounded oils) were found to be effective in reducing pitting, but suffered from rapid oxidation at high running temperatures. Alphasyn GS grades are suitable for these applications and also allow extended drain and change intervals. Some manufacturers employ them for fill-for-life lubricants.

Advantages  -

·         Reduced frictional losses leads to reduced energy consumption and lower sump temperatures.
·         Higher thermal stability, hence minimal formation of sludge and deposits.
·         Better load-carrying properties and reduced wear compared with conventional mineral oils.
·         Inherently higher Viscosity Index (VI) which, with the lower pour point, results in a wider range of service temperatures (-30 °C to 150 °C continuous bulk temperatures, with intermittent operating temperatures of up to 220°C)



Looking for any other schmierstoffe product in CASTROL ENGINE OIL & LUBRICANTS or other Lubricant ? Just give us a call.















Source URL -
https://www.schmierstoffe-online.com/product/castrol-alphasyn-gs-220/




Email: info@dm-schmierstoffservice.de
Contact No: +49 8106 3978728
Tags:
Castrol Alphasyn Gs 220,Castrol schmierstoffe, Castrol lubricants, Castrol lubricant, Castrol schmierstoff, Castrol oil, Castrol motor oil, Castrol Brake Fluid, Castrol Fluid

#Lubricants #MotorOil #EngineOil #CrudeOil #Grease #HydraulicOil #SyntheticOil #CarOil #GearOill #Oil #Gas #HydraulicFluid #BrakeFluid #RapeseedOil #TractorOil #CylinderOil #Lubricant #IndustrialLubricants #Fette #MineralOil #TransmissionOil #Petronas #Kluber #Meguin #Castrol



Labels:

Comments

Post a Comment

Popular posts from this blog

ARAL Degol BMB 1200

ARAL Degol BMB 1200 is gear oil type CLPF Recommended Use   - Aral Degol BMB 1200 is a high-performance gear oil with solid lubricant additives (molybdenum disulfide / MoS2). This oil complies with the requirements of DIN 51517-3, and is marked according to DIN 51502 as transmission oil type CLPF. The type and proportion of the MoS2, which is particularly stable, are specially adapted to the base oil and the other additives. Thus, highest efficiency can be achieved over a wide load range. Noteworthy features of this gear oil are in addition to the neutrality towards non-ferrous metals and seals a high thermal stability, good aging resistance and an extremely good corrosion protection. Application   - Aral Degol BMB 1200 is predestined for use in slow-running heavy-duty drives and under heavy shock and vibration loads. It ensures lubrication even if the reaction layers, which have been formed by chemically dissolved active subs...
Post a Comment
Read more

Klüber Hotemp Super N Plus

Klüber Hotemp Super N Plus is a special high-temperature oil for continuous wood panel presses Benefits For Your Application   - – Reduced energy consumption and improved efficiency due to advanced additives, even at very high temperatures – No lacquer-like residues formed under continuous total loss lubrication conditions – Low evaporation losses with reduced oil consumption and fume formation – Good adhesion and spreading properties, minimised contamination risk and effective lubricant supply to all friction points Description   - HOTEMP SUPER N PLUS is a special high-temperature oil for use on the latest generation of continuous board presses subject to highest process temperatures and speeds. HOTEMP SUPER N PLUS is an advanced product based on the HOTEMP…series with further development in terms of evaporation losses at temperatures between 230 and 260 °C. No lacquer-like residues are formed under continuous total loss lubrication condition...
Post a Comment
Read more

Mobil Mobilmet 443

MOBIL MOBILMET 443 is a High Performance Oil-Based Cutting Fluids Product Description   - Mobilmet 440 Series fluids are high performance, multi-service, non-corrosive straight cutting fluids. They are designed for moderate to heave duty cutting operations. They are also suitable for machine tool lubrication and use as hydraulic fluids in specific applications. They are formulated from high quality base oils and chlorine-free additives to provide effective machine performance in a wide variety of moderate to severe operations. They are non-staining to both ferrous and non-ferrous metals during machining. Mobilet 440 Series fluids are formulated to prevent the formation of oil mist in the vicinity of the machine tool, thus contributing to a safer and more pleasant working environment. Features and Benefits   - Mobilmet 440 Series Fluids are designed for a very wide variety of non-corrosive cutting and machining operations that range from moderate ...
Post a Comment
Read more