Skip to main content

Klüber Hotemp 2000 Spray



Klüber Hotemp 2000 Spray Is an advanced, synthetic high-temperature lubricating oil in aerosol form for manual lubrication.

Benefits For Your Application  -


– High thermal stability
– Good adhesion to friction points, long-term lubricating effect
– Good creeping and penetration, hence lower consumption
– Resistant to centrifuging, therefore reduced risk of contamination
– Insoluble in water, good wash-off resistance



Description  -



HOTEMP 2000 Spray is an advanced, synthetic hightemperature lubricant in aerosol form for friction points that are normally lubricated manually.
Following evaporation of the solvent, HOTEMP 2000 Spray forms an even, thin and highly adhesive lubricant film.




Application  -



HOTEMP 2000 Spray is used for lubrication points subject to high thermal loads as are common in chains, slideways, gears, wire ropes, guideways or cams.
HOTEMP 2000 Spray is also an ideal lubricant for motorcycle chains (also O-ring chains). It is not washed off and penetrates well into chain joints and friction points.
HOTEMP 2000 Spray forms a durable, load-carrying lubricant film even at high temperatures. For the ideal service temperature, please refer to the product data.


Application Notes  -




Ensure sufficient ventilation when processing HOTEMP 2000 Spray as explosive mixtures may form.
Do not spray against naked flame or onto hot or incandescent objects. Observe additional instructions for use in material
safety data sheet and on can label.
When applied, HOTEMP 2000 Spray forms a highly adhesive lubricant film that resists centrifuging and water wash-off. It is economical in use thanks to its adjustable nozzle. The spray jet can be changed from vertical to horizontal to ensure application of the right quantity at the desired lubrication point.

Sprays should not be exposed to direct sunlight and temperatures above 50 °C.


Looking for any other product in Kluber Lubrication or other Lubricant ? Just give us a call.





Source URL: 


Email: info@dm-schmierstoffservice.de
Contact No: +49 8106 3978728


Tags:
Klüber Hotemp 2000 Spray,Kluber schmierstoffe, Kluber lubricants, Kluber lubricant, Kluber schmierstoff, Kluber oil, Kluber motor oil, Kluber Brake Fluid, Kluber Fluid

#Lubricants #MotorOil #EngineOil #CrudeOil #Grease #HydraulicOil #SyntheticOil #CarOil #GearOill #Oil #Gas #HydraulicFluid #BrakeFluid #RapeseedOil #TractorOil #CylinderOil #Lubricant #IndustrialLubricants #Fette #MineralOil #TransmissionOil #Petronas #Kluber #Meguin #Castrol


Comments

Popular posts from this blog

ARAL Degol BMB 1200

ARAL Degol BMB 1200 is gear oil type CLPF Recommended Use   - Aral Degol BMB 1200 is a high-performance gear oil with solid lubricant additives (molybdenum disulfide / MoS2). This oil complies with the requirements of DIN 51517-3, and is marked according to DIN 51502 as transmission oil type CLPF. The type and proportion of the MoS2, which is particularly stable, are specially adapted to the base oil and the other additives. Thus, highest efficiency can be achieved over a wide load range. Noteworthy features of this gear oil are in addition to the neutrality towards non-ferrous metals and seals a high thermal stability, good aging resistance and an extremely good corrosion protection. Application   - Aral Degol BMB 1200 is predestined for use in slow-running heavy-duty drives and under heavy shock and vibration loads. It ensures lubrication even if the reaction layers, which have been formed by chemically dissolved active subs...

Fuchs Renocal FN 745/94 – Schmierstoffe-online.com

Fuchs Renocal FN 745/94 Is multi- purpose lubricating grease. Description: FUCHS RENOCAL FN 745/94 is a low temperature multipurpose grease based on calcium soap with corrosion and oxidation inhibitors. RENOCAL FN 745/94 protects reliably from corrosion and shows good water resistance, even at higher temperatures. Furthermore it is easily pumpable in central lubricating systems, also at low temperatures. It is compatible with paint. RENOCAL FN 745/94 causes no discoloration during assembly work even if it comes into contact with painted chassis parts. Application: RENOCAL FN 745/94 is especially recommended for use in motor vehicle assemblies such as doors and other locks, hinges and joints, sliding roofs, seat mechanisms, mirror mechanisms, bowden cables, window lifters, adjustment mechanisms, fans etc. RENOCAL FN 745/94 is also used for first-fill of central lubricating systems and distributors. Advantages: • Huge temperature range • Good corrosion...

Aeroshell, Aeroshell Fluid 41, Aeroshell Grease, Aeroshell 33ms, Aeroshell w100 | schmierstoffe-online.com

Aeroshell, Aeroshell Fluid 41, Aeroshell Grease, Aeroshell 33ms, Aeroshell w100 |  schmierstoffe-online.com Schmierstoffe-online.com  provides aeroshell fluid 41, aeroshell grease, aeroshell 33ms, aeroshell w100, aeroshell aerobatic team, aeroshell fluid 41 msds, aeroshell turbine oil 560, aeroshell fluid 12, aeroshell fluid 31, aeroshell 500, aeroshell turbine oil 500, aeroshell 17, aeroshell fluid, aeroshell grease 22, aeroshell oil sport plus 4, aeroshell fluid 41 equivalent, aeroshell grease 5, aeroshell 560, aeroshell grease 6, aeroshell grease 7, aeroshell 7, aeroshell grease 14, aeroshell 22, aeroshell grease 33, aeroshell fluid 3, aeroshell w120, aeroshell 5, aeroshell fluid 4, aeroshell 14, aeroshell 6, aeroshell sport plus 4, aeroshell grease 64, aeroshell 41, aeroshell 15w50 aviation oil, aeroshell w15w50, aeroshell oil w100, aeroshell w100 plus, aeroshell 64, aeroshell 33, aeroshell 15w50, aeroshell oil, aeroshell grease 33ms, aeroshell 100w plus etc. ...