Skip to main content

Fuchs Anticorit RP 4107 S


Fuchs Anticorit RP 4107 S Is a thixotropic, barium-free corrosion protection oils 
Fuchs Anticorit RP 4107 S is a Corrosion Preventive Oil


Description  -



FUCHS ANTICORIT RP 4107 S is a barium-free corrosion preventive which offers excellent protection on cold rolled steel under condensation climates, salt spray atmospheres and open shed conditions. ANTICORIT RP 4107 S is run-off reduced (thixotropic) and provides optimum film stability even on vertical surfaces. ANTICORIT RP 4107 S can be easily removed with neutral or alkaline water-based cleaners.

ANTICORIT RP 4107 S protects semi-finished cold rolled steel components during transportation and open shed storage when superior protection and easy removability are required. This excellent corrosion protection is suitable for hot-rolled strip or for all kind of cold-rolled surfaces like electrolytically galvanised, hot-dip galvanised, galvanealed, pre-phosphated or microphosphated.

ANTICORIT RP 4107 S is the only corrosion preventive fully approved by the German Automobile Manufactures(VDA). It is used by the entire European steel mills. A low viscosity version of this product designed for cleaning of steel stripes and blanks to remove dirt prior to stamping is available with 12 cST/40 °C as ANTICORIT RP 4107 LV.

ANTICORIT RP 4107 S is approved by many manufactures of electrostatic spraying equipment like eg DUMA, SMR, Peabody and Ravarini.


Application  -


ANTICORIT RP 4107 S is used to preserve semi-finished parts made of iron, especially sensitive cold rolled steel. It is also used as corrosion preventive for shed storage and for transportation if high requirements on removing and indifficult climates are requested. ANTICORIT RP 4107 S is more and more used for the conservation of CKD-parts and for the shipping and long-term conservation of engines, engine-parts and for blanc body parts. The recommended application temperature for spraying and filtering is 50 to 65 °C. While applying, the safety regulations have to be taken into account.






Approvals  -


• ThyssenKrupp Europe Steel AG
• Arcelormittal
• Salzgitter Flachstahl
• VDA
• Voest Alpine


Benefits  -

• Easy to apply
• Universal use
• Excellent corrosion inhibition
• No run-off
• Barium-free
• Free of Octylphenylethoxylate


Storage Conditions  -


If sealed in the original container ANTICORIT RP 4107 S can be stored up to 36 months at temperatures between – 20 and + 40 °C. At longer storage it is possible, like with all thixotropic products that some thixotropic agents will settle down.
The original quality is recreated by simply stirring. The indication of a minimum period of storage does not include any guarantee of durability

Looking for any other schmierstoffe product in FUCHS Lubricants or other Lubricant ? Just give us a call.

Source URL: 
https://www.schmierstoffe-online.com/product/fuchs-anticorit-rp-4107-s/


Email: info@dm-schmierstoffservice.de
Contact No: +49 8106 3978728


Tags:
Fuchs Anticorit RP 4107 S,Fuchs schmierstoffe, Fuchs lubricants, Fuchs lubricant, Fuchs schmierstoff, Fuchs oil, Fuchs motor oil, Fuchs Brake Fluid, Fuchs Fluid

#Lubricants #MotorOil #EngineOil #CrudeOil #Grease #HydraulicOil #SyntheticOil #CarOil #GearOill #Oil #Gas #HydraulicFluid #BrakeFluid #RapeseedOil #TractorOil #CylinderOil #Lubricant #IndustrialLubricants #Fette #MineralOil #TransmissionOil #Petronas #Kluber #Meguin #Castrol




Labels:

Comments

Post a Comment

Popular posts from this blog

Fuchs Referenzfluessigkeit IRM 903

Fuchs Referenzfluessigkeit IRM 903 is a reference oil, IRM REFERENCE OILS per ASTM D 471-06 Description   - The ASTM standard test method D 471-06 deals with the effect of liquids on elastomers (“Rubber Property – Effect of Liquids”). Besides describing the procedures for various elastomer tests, it lists standard test liquids with which reference measurements can be performed. The ASTM D 471-06 method divides the standard test liquids into three groups: ·          IRM reference oils ·          ASTM reference fuels ·          ASTM service liquids IRM Reference oils   - The reference oils listed under IRM — IRM 901, IRM 902 and IRM 903 — are mineral oils with different paraffin and aromatic concentrations. Basically, the effect on elastomers increases as the content of aromatics increases (swelling behaviour). ...
Post a Comment
Read more

Mobil Mobilmet 443

MOBIL MOBILMET 443 is a High Performance Oil-Based Cutting Fluids Product Description   - Mobilmet 440 Series fluids are high performance, multi-service, non-corrosive straight cutting fluids. They are designed for moderate to heave duty cutting operations. They are also suitable for machine tool lubrication and use as hydraulic fluids in specific applications. They are formulated from high quality base oils and chlorine-free additives to provide effective machine performance in a wide variety of moderate to severe operations. They are non-staining to both ferrous and non-ferrous metals during machining. Mobilet 440 Series fluids are formulated to prevent the formation of oil mist in the vicinity of the machine tool, thus contributing to a safer and more pleasant working environment. Features and Benefits   - Mobilmet 440 Series Fluids are designed for a very wide variety of non-corrosive cutting and machining operations that range from moderate ...
Post a Comment
Read more

SHELL VSI 8235

Shell VSI 8235 (Concentrate) PROTECTS AGAINST RUSTING IN ENCLOSED VAPOUR SPACES Shell VSI 8235 (Concentrate) is an oil soluble concentrate that has the ability to protect steel surfaceswhich are above the normal oil level in a system e.g. the vapour spaces in an oil storage tank or the oil reservoir in a circulation system. PERFORMANCE FEATURES - ·          Shell VSI 8235 (Concentrate) contains polar materials which are both oil soluble and also volatile. Thus, as Shell VSI 8235 (Concentrate) is in circulation, the vapour spaces in a system are continuously kept filled with the VSI vapour which is formed by these inhibitors and this vapour continuously blankets metal surfaces to protect them from corrosion. ·          Shell VSI 8235 (Concentrate) should be added to the lubricant contained in the sump or in the oil tank a few hours before the equipment is stopped. For new p...
Post a Comment
Read more