Skip to main content

Klüber Structovis FHD




Klüber Structovis FHD is a mineral oil-based special lubricant

Benefits For Your Application  -

– Good wear protection
– Good corrosion protection
– Adhesive
– Noise dampening (depending on viscosity)
– Emergency lubricating properties (BHD MF)



Description  -

STRUCTOVIS HD is a special lubricant series based on mineral oil and available in different viscosity grades. The STRUCTOVIS types AHD to EHD, BHD MF and BHD 75 S contain special adhesion improvers, the type BHD MF the solid lubricant MoS2 for improved emergency lubricating properties. STRUCTOVIS BHD 75 S contains a flammable solvent. All STRUCTOVIS HD types offer good wear and corrosion protection. The STRUCTOVIS types provided with an adhesion improver are extremely adhesive thus reducing considerably the risk of contamination due to oil leakage, especially at high chain speeds. The STRUCTOVIS types of higher viscosity (AHD to CHD) may also reduce noise of chains.

Note: The product data of STRUCTOVIS BHD Spray and STRUCTOVIS BHD 75 S refer to the solvent-free active agent.

Application  -

STRUCTOVIS HD lubricants are used for driving, control and conveyor chains. STRUCTOVIS BHD and BHD 75 S have proven particularly effective for the initial lubrication of steel link chains by the chain manufacturer.

Application Notes  -

Depending on the viscosity STRUCTOVIS HD can be applied by drip-feed or automatic lubrication systems, oil feeders or brush. When using automatic systems please observe the maximum viscosity specified by the manufacturer. If STRUCTOVIS BHD is applied by the chain manufacturer we recommend an immersion bath temperature between 80 and 90 °C. The low-viscosity HD types (up to 460 mm²/s at 40 °C) and BHD 75 S (please also observe safety data sheet) can also be applied in a cold-bath process. The chain should remain in the bath until no more air bubbles rise to the surface.

Looking for any other product in Kluber Lubrication or other Lubricant ? Just give us a call.


Source URL -
https://www.schmierstoffe-online.com/product/kluber-structovis-fhd/

Email: info@dm-schmierstoffservice.de
Contact No: +49 8106 3978728

Tags:

Klüber Structovis FHD, Klüber schmierstoffe, Klüber lubricants, Klüber lubricant, Klüber schmierstoff, Klüber oil, Klüber motor oil, Klüber Brake Fluid, Klüber Fluid


#Lubricants #MotorOil #EngineOil #CrudeOil #Grease #HydraulicOil #SyntheticOil #CarOil #GearOill #Oil #Gas #HydraulicFluid #BrakeFluid #RapeseedOil #TractorOil #CylinderOil #Lubricant #IndustrialLubricants #Fette #MineralOil #TransmissionOil #Petronas #Kluber #Meguin #Castrol


Labels:

Comments

Post a Comment

Popular posts from this blog

FUCHS RENOLIT PU-8-061/2 – Schmierstoffe-online.com

Fuchs RENOLIT PU-8-061/2 is a high-temperature grease. Description: FUCHS  RENOLIT PU-8-061/2 is a semi-synthetic, high-temperature grease containing a special PU-based thickener combination which provides a number of benefits. Outstanding features of RENOLIT PU-8- 061/2 include high thermal stability, low evaporation losses, long-term corrosion protection, good water resistance and optimal lubricity over a wide temperature range. Application: RENOLIT PU-8-061/2 is recommended for the longterm lubrication of plain and roller bearings over a wide temperature range. RENOLIT PU-8-061/2 has a proven record for high temperature applications such as conveyer drives in drying kilns, hot-air blowers, spindle bearings, tumble dryers, black-rubber mixers, paper industry dryers, electric motors, hot air flaps etc. Re-greasing intervals should be matched to the application in question. Advantages: • High thermal stability • Low evaporation loss ...
Post a Comment
Read more

Why You Should Go for Megol Gearoil Synth ISO VG 220?

What are the essential requirements you need to check when you are looking for high quality lubricants? Well, there are many things you need to take care of, but one of the most important things that you need to look out is the lubrication and wear prevention properties of the lubricants and if you are looking for such properties, just go for Schmierstoffe service’s megol Gearoil Synth ISO VG 220 , an EP lubricant that has all the answers of your questions and are best suitable for your industrial gearboxes and roller and plain bearings. It has excellent wear protection properties as well as good lubricant endurance and specific oil consumption. All you need to do is to just buy it and that is all. Meguin Getriebeoel CLPF 220 is another name you can look forward to when you are looking for EP lubricant with specially stabilized molykote. For best circular lubrication systems, it serves the core purpose. If you are looking for more information on the subject, you can visi...
Post a Comment
Read more

Fuchs Renolin 504 VDL 100

Fuchs Renolin 504 VDL 100 is an air Compressor Oil and Gas Compressor Oil Description   - FUCHS RENOLIN 500 Series can be used in air compressors and can also be used in compressors working with hydrocarbon gas e.g. natural gas (different composition), propane, propen and process gas. The products of the RENOLIN 500 Series are air compressor oils for piston and rotation compressors according to DIN 51506 Type VDL. The RENOLIN 500 Series is formulated on the basis of especially highly refined base oils; the additives select make possible reliable use at high thermal stress without the formation of damaging residue. Intensified laboratory tests and many years of experience with use confirm the extraordinary oxidation stability of these special compressor oils. Fuchs Renolin 504 VDL 100 is made from highly refined mineral oils and a special additive package that gives this product exceptional oxidation stability under high thermal loads. Fox Re...
Post a Comment
Read more