Skip to main content

Klüber Summit HySyn FG 32




Klüber Summit HySyn FG 32 Is a fully synthetic compressor oil.
Klüber Summit HySyn FG 32 is a Fully synthetic compressor oils for the food-processing and pharmaceutical industry.

Benefits For Your Application  -

– Klüber Summit HySyn FG oils are NSF H1 registered for use in the food-processing and pharmaceutical industry and comply with FDA 21 CFR Sec 178.3570.

– ISO 21469 certified – supports compliance with the hygienic requirements of your production.

– Low maintenance and operating costs due to extended oil change intervals up to 4,000 operating hours in oilinjected screw-type compressors.

– Easy compressor conversion from mineral to the synthetic Klüber Summit HySyn FG oils due to                            miscibility and compatibility with common seal materials.

– Low tendency to evaporation and thus low impact of the oil vapour on the compressed air.

– Long service of oils filters, activated carbon filters and oil separators.

– Also suitable for the lubrication of gears due to the high scuffing load capacity.

– Used and approved by Aerzener, Air Liquide, Boge, CompAir, Worthington, Getriebebau Nord, Lenze etc.

Description  -

Klüber Summit HySyn FG oils are air compressor oils based on synthetic hydrocarbon oils. They can be mixed with mineral oils and other synthetic hydrocarbon oils.

Klüber Summit HySyn FG oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators.

Klüber Summit HySyn FG oils are NSF H1 registered and therefore comply with FDA 21 CFR § 178.3570. The lubricants were developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klüber Summit HySyn FG oils can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.







Application  -

Klüber Summit HySyn oils can be used for oil-injected screwtype compressors, reciprocating piston compressors and centrifugal compressors.

Klüber Summit HySyn FG oils are intended for use in compressors of the food-processing and pharmaceutical industry requiring oil-free compressed air (without oil vapour which cannot be removed by the oil separator).

Klüber Summit HySyn FG oils can also be used for the lubrication of gears in oil-free screw-type compressors.

Owing to their good stability, these oils are also suitable for low temperature applications in industrial gears.

Application Notes  -

When selecting the oil viscosity for air compressors, please observe the manufacturers’ instructions.
For oil-injected screw-type compressors normally the viscosity grades ISO VG 32, 46 and 68 are used, for reciprocating piston compressors ISO VG 68 and 100 and for centrifugal compressors ISO VG 32.

Notes on switching from mineral to synthetic oils  -

·         When switching a used compressor to a Klüber Summit HySyn FG oil, drain old oil from whole circuit of compressor while still warm.

·         We also recommend changing all oil filters and separators.
·         Then refill the compressor with Klüber Summit HySyn FG oil.
·         When switching from mineral oil to a synthetic Klüber Summit HySyn FG oil please consider that the compressor may contain oxidation residues in the form of blackened or contaminated oil.
·         As such residues can affect the service life of the fresh Klüber Summit HySyn FG oil, the compressor should be cleaned using the Klüber Summit Varnasolv conditioner (cf. product information leaflet).
·         After switching to a Klüber Summit HySyn FG oil we recommend determining the oil change interval through an oil analysis or the Klüber Summit TAN Kit after approx. 500 to 1000 operating hours.
Your contact person at Klüber Lubrication would be pleased to provide further information.

Looking for any other schmierstoffe product in Kluber Lubrication or other Lubricant ? Just give us a call.

Source URL -
https://www.schmierstoffe-online.com/product/kluber-summit-hysyn-fg-32/
Email: info@dm-schmierstoffservice.de
Contact No: +49 8106 3978728

Tags:

Klüber Summit HySyn FG 32, Klüber schmierstoffe, Klüber lubricants, Klüber lubricant, Klüber schmierstoff, Klüber oil, Klüber motor oil, Klüber Brake Fluid, Klüber Fluid


#Lubricants #MotorOil #EngineOil #CrudeOil #Grease #HydraulicOil #SyntheticOil #CarOil #GearOill #Oil #Gas #HydraulicFluid #BrakeFluid #RapeseedOil #TractorOil #CylinderOil #Lubricant #IndustrialLubricants #Fette #MineralOil #TransmissionOil #Petronas #Kluber #Meguin #Castrol


Labels:

Comments

Post a Comment

Popular posts from this blog

FUCHS RENOLIT PU-8-061/2 – Schmierstoffe-online.com

Fuchs RENOLIT PU-8-061/2 is a high-temperature grease. Description: FUCHS  RENOLIT PU-8-061/2 is a semi-synthetic, high-temperature grease containing a special PU-based thickener combination which provides a number of benefits. Outstanding features of RENOLIT PU-8- 061/2 include high thermal stability, low evaporation losses, long-term corrosion protection, good water resistance and optimal lubricity over a wide temperature range. Application: RENOLIT PU-8-061/2 is recommended for the longterm lubrication of plain and roller bearings over a wide temperature range. RENOLIT PU-8-061/2 has a proven record for high temperature applications such as conveyer drives in drying kilns, hot-air blowers, spindle bearings, tumble dryers, black-rubber mixers, paper industry dryers, electric motors, hot air flaps etc. Re-greasing intervals should be matched to the application in question. Advantages: • High thermal stability • Low evaporation loss ...
Post a Comment
Read more

Why You Should Go for Megol Gearoil Synth ISO VG 220?

What are the essential requirements you need to check when you are looking for high quality lubricants? Well, there are many things you need to take care of, but one of the most important things that you need to look out is the lubrication and wear prevention properties of the lubricants and if you are looking for such properties, just go for Schmierstoffe service’s megol Gearoil Synth ISO VG 220 , an EP lubricant that has all the answers of your questions and are best suitable for your industrial gearboxes and roller and plain bearings. It has excellent wear protection properties as well as good lubricant endurance and specific oil consumption. All you need to do is to just buy it and that is all. Meguin Getriebeoel CLPF 220 is another name you can look forward to when you are looking for EP lubricant with specially stabilized molykote. For best circular lubrication systems, it serves the core purpose. If you are looking for more information on the subject, you can visi...
Post a Comment
Read more

Fuchs Renolin 504 VDL 100

Fuchs Renolin 504 VDL 100 is an air Compressor Oil and Gas Compressor Oil Description   - FUCHS RENOLIN 500 Series can be used in air compressors and can also be used in compressors working with hydrocarbon gas e.g. natural gas (different composition), propane, propen and process gas. The products of the RENOLIN 500 Series are air compressor oils for piston and rotation compressors according to DIN 51506 Type VDL. The RENOLIN 500 Series is formulated on the basis of especially highly refined base oils; the additives select make possible reliable use at high thermal stress without the formation of damaging residue. Intensified laboratory tests and many years of experience with use confirm the extraordinary oxidation stability of these special compressor oils. Fuchs Renolin 504 VDL 100 is made from highly refined mineral oils and a special additive package that gives this product exceptional oxidation stability under high thermal loads. Fox Re...
Post a Comment
Read more