Skip to main content

Meguin Getriebeoel CLP 46



Description  -

Gearbox oil CLP is an EP lubricant offering excellent lubrication and wear-prevention properties. Made from high quality base oils and the latest sulphur phosphorus additives.Suitable for use in industrial gearboxes, roller and plain bearings that are exposed to high loads, and in particular also for large systems with circulation lubrication systems.

Meguin CLP 32 is a high-performance gear oil with EP properties (ExtremePressure) with excellent lubrication and wear protection. Developed from high quality base oils and an optimally matched additive combination. Can be used in industrial gear units, in heavily loaded roller and plain bearings, especially for large systems with circulation lubrication. 

EP lubricants with excellent lubricating and anti-wear properties. Made of high-quality base oils and the latest sulfur-phosphorus additives. Suitable for use in industrial gears, rolling and sliding bearings with high pressure loads, especially for large systems with circulation lubrication.

Gear oil CLP is an EP lubricant with excellent lubrication and wear protection properties. Made of high-quality base oils and the latest sulfur-phosphorusadditives. Suitable for use in industrial gears, rolling and plain bearings with high pressure loads, especially for large systems with circulation lubrication.


Specifications and approvals  -

·         Schmieröl DIN 51517 CLP 46
·         ISO viscosity class / DIN 51519 / VG 46
·         Viscosity at 40 ° C / DIN 51562 / mm² / s / 48
·         Viscosity at 100 ° C / DIN 51562 / mm² / s / 7.0
·         Viscosity index / / DIN ISO
·         2909/102 Density at 15 ° C / DIN 51757 / kg / m³ / 890
·         Flash point / DIN ISO 2592 / ° C / 220
·         Pour point / DIN ISO 3016 / ° C / -30 Air
·         separation capacity at 50 ° C / DIN ISO 9120 / min. / 8
·         Demulsibility at 54 ° C / DIN ISO 6614 / min. / <10 o:p="">
·         ash, oxide / DIN EN ISO 6245 / g / 100g / 0.03
·         ash, sulphate / DIN 51575 / g / 100g / 0.04
·         neutralization number, acidic / DIN 51558 part 1 / mg / KOH / g / 0, 5
·         Correlation to steel / DIN ISO 7120 / Corr. / 0-B
·         Corr. Effect on Cu / DIN ISO 2160 / Corr. / 1-125 A3
·         Foaming Properties / ISO 6247 / S1B-0/0, S2B-0/0, S3B-0/0
·         FZG Gear Short
·         Test / DIN 51354 Part 2 Test A / 16.6 / 90 / Damage Level / /> 12
·         Spe .Gew.Änder. / mg / KWh / <0 o:p="">





Looking for any other schmierstoffe product in MEGUIN LUBRICANTS or other Lubricant ? Just give us a call.

Source URL -
https://www.schmierstoffe-online.com/product/meguin-getriebeoel-clp-46/

Email: info@dm-schmierstoffservice.de
Contact No: +49 8106 3978728

Tags:
Meguin Getriebeoel Clp 46,Meguin schmierstoffe, Meguin lubricants, Meguin lubricant, Meguin schmierstoff, Meguin oil, Meguin motor oil, Meguin Brake Fluid, Meguin Fluid

#Lubricants #MotorOil #EngineOil #CrudeOil #Grease #HydraulicOil #SyntheticOil #CarOil #GearOill #Oil #Gas #HydraulicFluid #BrakeFluid #RapeseedOil #TractorOil #CylinderOil #Lubricant #IndustrialLubricants #Fette #MineralOil #TransmissionOil #Petronas #Kluber #Meguin #Castrol


Labels:

Comments

Post a Comment

Popular posts from this blog

ARAL Degol BMB 1200

ARAL Degol BMB 1200 is gear oil type CLPF Recommended Use   - Aral Degol BMB 1200 is a high-performance gear oil with solid lubricant additives (molybdenum disulfide / MoS2). This oil complies with the requirements of DIN 51517-3, and is marked according to DIN 51502 as transmission oil type CLPF. The type and proportion of the MoS2, which is particularly stable, are specially adapted to the base oil and the other additives. Thus, highest efficiency can be achieved over a wide load range. Noteworthy features of this gear oil are in addition to the neutrality towards non-ferrous metals and seals a high thermal stability, good aging resistance and an extremely good corrosion protection. Application   - Aral Degol BMB 1200 is predestined for use in slow-running heavy-duty drives and under heavy shock and vibration loads. It ensures lubrication even if the reaction layers, which have been formed by chemically dissolved active subs...
Post a Comment
Read more

Klüber Hotemp Super N Plus

Klüber Hotemp Super N Plus is a special high-temperature oil for continuous wood panel presses Benefits For Your Application   - – Reduced energy consumption and improved efficiency due to advanced additives, even at very high temperatures – No lacquer-like residues formed under continuous total loss lubrication conditions – Low evaporation losses with reduced oil consumption and fume formation – Good adhesion and spreading properties, minimised contamination risk and effective lubricant supply to all friction points Description   - HOTEMP SUPER N PLUS is a special high-temperature oil for use on the latest generation of continuous board presses subject to highest process temperatures and speeds. HOTEMP SUPER N PLUS is an advanced product based on the HOTEMP…series with further development in terms of evaporation losses at temperatures between 230 and 260 °C. No lacquer-like residues are formed under continuous total loss lubrication condition...
Post a Comment
Read more

Mobil Mobilmet 443

MOBIL MOBILMET 443 is a High Performance Oil-Based Cutting Fluids Product Description   - Mobilmet 440 Series fluids are high performance, multi-service, non-corrosive straight cutting fluids. They are designed for moderate to heave duty cutting operations. They are also suitable for machine tool lubrication and use as hydraulic fluids in specific applications. They are formulated from high quality base oils and chlorine-free additives to provide effective machine performance in a wide variety of moderate to severe operations. They are non-staining to both ferrous and non-ferrous metals during machining. Mobilet 440 Series fluids are formulated to prevent the formation of oil mist in the vicinity of the machine tool, thus contributing to a safer and more pleasant working environment. Features and Benefits   - Mobilmet 440 Series Fluids are designed for a very wide variety of non-corrosive cutting and machining operations that range from moderate ...
Post a Comment
Read more