Skip to main content

Fuchs Referenzfluessigkeit IRM 902




Fuchs Referenzfluessigkeit IRM 902 is a reference oil
Fuchs Referenzfluessigkeit IRM 902 is an IRM REFERENCE OILS per ASTM D 471-06


Description  -


The ASTM standard test method D 471-06 deals with the effect of liquids on elastomers (“Rubber Property – Effect of Liquids”). Besides describing the procedures for various elastomer tests, it lists standard test liquids with which reference measurements can be performed. The ASTM D 471-06 method divides the standard test liquids into three groups:

• IRM reference oils
• ASTM reference fuels
• ASTM service liquids



IRM Reference oils  -


The reference oils listed under FUCHS  IRM — IRM 901, IRM 902 and IRM 903 — are mineral oils with different paraffin and aromatic concentrations. Basically, the effect on elastomers increases as the content of aromatics increases (swelling behaviour). IRM 901 has the lowest aromatic concentration, and IRM 903 has the highest aromatic concentration. The aniline point is generally regarded as the indicator of aromatic content. The aniline point is the temperature in °C at which a solution made homogeneous by warming and having identical parts by volume of oil and aniline becomes cloudy when cooled, due to separation. The lower the aniline point, the higher the aromatic content and, therefore, the swelling behaviour of the mineral oil. ASTM oils No. 2 and 3 used previously were suspected of having carcinogenic effects, and were replaced by IRM oils 902 and 903. The introduction of IRM 901 as a replacement for ASTM No. 1 oil was necessitated by the sudden unavailability of ASTM No. 1 oil. The IRM oils behave very similarly to elastomers, but they are not fully equivalent to ASTM oils No. 1, 2 and 3.


FUCHS SCHMIERSTOFFE GMBH keeps the reference oils IRM 901, IRM 902 and IRM 903 on hand at all times. These reference oils are imported, original oils. This ensures that the test results obtained with them are comparable around the world.
Please refer to ASTM D 471-06 and ASTM D 5964-07 for more information.

Looking for any other schmierstoffe product in FUCHS Lubricants or other Lubricant ? Just give us a call.

Source URL: 
https://www.schmierstoffe-online.com/product/fuchs-referenzfluessigkeit-irm-902/

Email: info@dm-schmierstoffservice.de
Contact No: +49 8106 3978728

Tags:
Fuchs Referenzfluessigkeit IRM 902, Fuchs schmierstoffe, Fuchs lubricants, Fuchs lubricant, Fuchs schmierstoff, Fuchs oil, Fuchs motor oil, Fuchs Brake Fluid, Fuchs Fluid


#Lubricants #MotorOil #EngineOil #CrudeOil #Grease #HydraulicOil #SyntheticOil #CarOil #GearOill #Oil #Gas #HydraulicFluid #BrakeFluid #RapeseedOil #TractorOil #CylinderOil #Lubricant #IndustrialLubricants #Fette #MineralOil #TransmissionOil #Petronas #Kluber #Meguin #Castrol


Labels:

Comments

Post a Comment

Popular posts from this blog

Fuchs Renolin 504 VDL 100

Fuchs Renolin 504 VDL 100 is an air Compressor Oil and Gas Compressor Oil Description   - FUCHS RENOLIN 500 Series can be used in air compressors and can also be used in compressors working with hydrocarbon gas e.g. natural gas (different composition), propane, propen and process gas. The products of the RENOLIN 500 Series are air compressor oils for piston and rotation compressors according to DIN 51506 Type VDL. The RENOLIN 500 Series is formulated on the basis of especially highly refined base oils; the additives select make possible reliable use at high thermal stress without the formation of damaging residue. Intensified laboratory tests and many years of experience with use confirm the extraordinary oxidation stability of these special compressor oils. Fuchs Renolin 504 VDL 100 is made from highly refined mineral oils and a special additive package that gives this product exceptional oxidation stability under high thermal loads. Fox Re...
Post a Comment
Read more

Why You Should Go for Megol Gearoil Synth ISO VG 220?

What are the essential requirements you need to check when you are looking for high quality lubricants? Well, there are many things you need to take care of, but one of the most important things that you need to look out is the lubrication and wear prevention properties of the lubricants and if you are looking for such properties, just go for Schmierstoffe service’s megol Gearoil Synth ISO VG 220 , an EP lubricant that has all the answers of your questions and are best suitable for your industrial gearboxes and roller and plain bearings. It has excellent wear protection properties as well as good lubricant endurance and specific oil consumption. All you need to do is to just buy it and that is all. Meguin Getriebeoel CLPF 220 is another name you can look forward to when you are looking for EP lubricant with specially stabilized molykote. For best circular lubrication systems, it serves the core purpose. If you are looking for more information on the subject, you can visi...
Post a Comment
Read more

ARAL Degol BMB 1200

ARAL Degol BMB 1200 is gear oil type CLPF Recommended Use   - Aral Degol BMB 1200 is a high-performance gear oil with solid lubricant additives (molybdenum disulfide / MoS2). This oil complies with the requirements of DIN 51517-3, and is marked according to DIN 51502 as transmission oil type CLPF. The type and proportion of the MoS2, which is particularly stable, are specially adapted to the base oil and the other additives. Thus, highest efficiency can be achieved over a wide load range. Noteworthy features of this gear oil are in addition to the neutrality towards non-ferrous metals and seals a high thermal stability, good aging resistance and an extremely good corrosion protection. Application   - Aral Degol BMB 1200 is predestined for use in slow-running heavy-duty drives and under heavy shock and vibration loads. It ensures lubrication even if the reaction layers, which have been formed by chemically dissolved active subs...
Post a Comment
Read more