Skip to main content

Fuchs Renolin Eterna 46




Fuchs Renolin Eterna 46 Is a Turbine oils turbo-compressors. 
Fuchs Renolin Eterna 46 is a High quality turbine oils – new generation


Description  -

FUCHS RENOLIN ETERNA turbine oils were developed for gas, steam, and expansion turbines as well as for turbo compressors with and without gearboxes based on the latest lubrication technology. The excellent properties of the base oils produced in a special process are enhanced using a carefully selected additive system. RENOLIN ETERNA oils contain no organo-metallic compounds and are therefore ash-less. They provide a zinc-free wear protection.


Application  -

RENOLIN ETERNA is especially suited for use in turbine systems with a common control and lubricating oil circuit. It can also be used as a bearing and sealing oil in hydrogen-cooled generators.
RENOLIN ETERNA has excellent anti wear properties and excellent Vickers Vane Pump results, V104C.

RENOLIN ETERNA has excellent wear protection properties. The failure load stage is 12 according to FZG test DIN ISO 14635-1.RENOLIN ETERNA shows excellent roller bearing wear protection. FE8 test is passed with excellent result.

RENOLIN ETERNA can be used as CLP (EP) gear oil according to DIN 51517-3.
RENOLIN ETERNA can also be used as lubricating oil in Hydropower turbines (water turbines).



Advantages  -

• High thermal stability
• Good viscosity-temperature behaviour
• Rapid air release
• No foaming
• Low pourpoint
• Good wear protection
• Excellent corrosion protection
• Good water separation behavior


Specifications  -

RENOLIN ETERNA 32/46 are approved by:
Siemens Power Generation
The RENOLIN ETERNA range also meets and in many cases exceeds the requirements of:
• DIN 51515-1 (TD) with and without gearbox
• DIN 51515-2 (TG) with and without gearbox
• DIN 51524-2: HLP
• (DIN 51524-3: HVLP – with exception of the VI)
• GE GEK 28568 A
• GE GEK 32568 J
• GE GEK 101941 A
• GE GEK 107395 A
• Siemens TLV 901304 / 901305
• Alstom HTGD 90117 V0001W
• Siemens MAT 812109
• MAN Turbo AG – SP10000494596, Germany
• Solar ES 9-224 ( Class I / Class II )
• MIL-PRF-17331 J
• DIN 51517-3 (CLP gear oil)
• ISO 7624: pass > 4,000 h

Looking for any other schmierstoffe product in FUCHS Lubricants or other Lubricant ? Just give us a call.


Source URL: 
https://www.schmierstoffe-online.com/product/fuchs-renolin-eterna-46/


Email: info@dm-schmierstoffservice.de
Contact No: +49 8106 3978728

Tags:
Fuchs Renolin Eterna 46, Fuchs schmierstoffe, Fuchs lubricants, Fuchs lubricant, Fuchs schmierstoff, Fuchs oil, Fuchs motor oil, Fuchs Brake Fluid, Fuchs Fluid


#Lubricants #MotorOil #EngineOil #CrudeOil #Grease #HydraulicOil #SyntheticOil #CarOil #GearOill #Oil #Gas #HydraulicFluid #BrakeFluid #RapeseedOil #TractorOil #CylinderOil #Lubricant #IndustrialLubricants #Fette #MineralOil #TransmissionOil #Petronas #Kluber #Meguin #Castrol

Labels:

Comments

Post a Comment

Popular posts from this blog

Fuchs Renolin 504 VDL 100

Fuchs Renolin 504 VDL 100 is an air Compressor Oil and Gas Compressor Oil Description   - FUCHS RENOLIN 500 Series can be used in air compressors and can also be used in compressors working with hydrocarbon gas e.g. natural gas (different composition), propane, propen and process gas. The products of the RENOLIN 500 Series are air compressor oils for piston and rotation compressors according to DIN 51506 Type VDL. The RENOLIN 500 Series is formulated on the basis of especially highly refined base oils; the additives select make possible reliable use at high thermal stress without the formation of damaging residue. Intensified laboratory tests and many years of experience with use confirm the extraordinary oxidation stability of these special compressor oils. Fuchs Renolin 504 VDL 100 is made from highly refined mineral oils and a special additive package that gives this product exceptional oxidation stability under high thermal loads. Fox Re...
Post a Comment
Read more

Why You Should Go for Megol Gearoil Synth ISO VG 220?

What are the essential requirements you need to check when you are looking for high quality lubricants? Well, there are many things you need to take care of, but one of the most important things that you need to look out is the lubrication and wear prevention properties of the lubricants and if you are looking for such properties, just go for Schmierstoffe service’s megol Gearoil Synth ISO VG 220 , an EP lubricant that has all the answers of your questions and are best suitable for your industrial gearboxes and roller and plain bearings. It has excellent wear protection properties as well as good lubricant endurance and specific oil consumption. All you need to do is to just buy it and that is all. Meguin Getriebeoel CLPF 220 is another name you can look forward to when you are looking for EP lubricant with specially stabilized molykote. For best circular lubrication systems, it serves the core purpose. If you are looking for more information on the subject, you can visi...
Post a Comment
Read more

ARAL Degol BMB 1200

ARAL Degol BMB 1200 is gear oil type CLPF Recommended Use   - Aral Degol BMB 1200 is a high-performance gear oil with solid lubricant additives (molybdenum disulfide / MoS2). This oil complies with the requirements of DIN 51517-3, and is marked according to DIN 51502 as transmission oil type CLPF. The type and proportion of the MoS2, which is particularly stable, are specially adapted to the base oil and the other additives. Thus, highest efficiency can be achieved over a wide load range. Noteworthy features of this gear oil are in addition to the neutrality towards non-ferrous metals and seals a high thermal stability, good aging resistance and an extremely good corrosion protection. Application   - Aral Degol BMB 1200 is predestined for use in slow-running heavy-duty drives and under heavy shock and vibration loads. It ensures lubrication even if the reaction layers, which have been formed by chemically dissolved active subs...
Post a Comment
Read more