Skip to main content

Fuchs Renolin CLPF 320 Super



Fuchs Renolin CLPF 320 Super Is a special raffinat of high aging resistance
Fuchs Renolin CLPF 320 Super is an EP industrial gear oils containing MoS2 (molybdenum disulphide) with extremely high load carrying capacity and excellent wear protection

Description  -

The FUCHS RENOLIN CLPF SUPER oils are industrial gear oils which combine the properties of chemical antiwear additives (phosphorus-sulphur chemistry) with physically active anti-wear layers (molybdenum disulphide – MoS2). The synergistic effect of phosphorus-sulphur additives of the latest generation with MoS2 guarantees highest anti-wear performance and extremely high load carrying capacity. The physically active layers of MoS2 guarantee excellent lubricity at low temperature over a wide range of working conditions. The RENOLIN CLPF SUPER oils offer excellent ageing stability and very good corrosion protection. The MoS2 as solid lubricant ensures reliable wear protection even under shock loads and unfavourable operating conditions. The MoS2 dampens vibrations and noise. Smoothing of previously-damaged tooth flanks in gear sets is observed. The solid lubricant MoS2 can also increase the load carrying capacity by smoothing damaged surfaces (increase of the specific surface). Selected detergent / dispersant components dissolve the solid lubricant stable in the base oil and guarantee excellent wetting of metal surfaces in practice. Therefore the phosphorussulphur- as well as the MoS2-components can ensure the anti-wear / extreme pressure performance.



Advantages  -

• Excellent corrosion protection
• Low foaming, good air release
• High ageing stability
• Extremely high load carrying capacity
• Excellent bearing wear protection – low wear in the FE8 test
• Excellent protection from scuffing, also at elevated as well as low velocity and temperature – excellent wear protection – FZG
• Excellent micropitting resistance
• Excellent Brugger wear protection
• Dampen vibrations and noise
• Good anti-seizing properties
• Smoothing effect of pre-damaged surfaces


Application  -

The RENOLIN CLPF SUPER oils are used for all kinds of industrial applications where the manufacturer recommends the use of a vibration and noise-dampening industrial gear oil, type CLP according to DIN 51 517-3. The RENOLIN CLPF SUPER products can be recommended for highlystressed, highly-loaded bearings, joints, pressing screws, spur and worm gears and spindles.
RENOLIN CLPF SUPER can be used up to 100°C and even at brief peak temperatures up to 120- 150°C. TheRENOLIN CLPF SUPER oils are particularly suited for lubricating impact crushers and gears subjected to shock load reversals.

Specifications  -

The products meet or exceed the requirements (except for the demulsifying requirements) according to:

• DIN 51517-3: CLP
• ISO 6743-6 and ISO 12925-1: CKC / CKD
• AGMA 9005/E02: EP (The RENOLIN CLPF SUPER products have detergent / dispersant properties).
• as well as the requirements of well-known, world-wide operating gear and component manufacturers.

Looking for any other schmierstoffe product in FUCHS Lubricants or other Lubricant ? Just give us a call.

Source URL: 
https://www.schmierstoffe-online.com/product/fuchs-renolin-clpf-320-super/

Email: info@dm-schmierstoffservice.de
Contact No: +49 8106 3978728

Tags:
Fuchs Renolin CLPF 320 Super, Fuchs schmierstoffe, Fuchs lubricants, Fuchs lubricant, Fuchs schmierstoff, Fuchs oil, Fuchs motor oil, Fuchs Brake Fluid, Fuchs Fluid

#Lubricants #MotorOil #EngineOil #CrudeOil #Grease #HydraulicOil #SyntheticOil #CarOil #GearOill #Oil #Gas #HydraulicFluid #BrakeFluid #RapeseedOil #TractorOil #CylinderOil #Lubricant #IndustrialLubricants #Fette #MineralOil #TransmissionOil #Petronas #Kluber #Meguin #Castrol


Labels:

Comments

Post a Comment

Popular posts from this blog

Fuchs Referenzfluessigkeit IRM 903

Fuchs Referenzfluessigkeit IRM 903 is a reference oil, IRM REFERENCE OILS per ASTM D 471-06 Description   - The ASTM standard test method D 471-06 deals with the effect of liquids on elastomers (“Rubber Property – Effect of Liquids”). Besides describing the procedures for various elastomer tests, it lists standard test liquids with which reference measurements can be performed. The ASTM D 471-06 method divides the standard test liquids into three groups: ·          IRM reference oils ·          ASTM reference fuels ·          ASTM service liquids IRM Reference oils   - The reference oils listed under IRM — IRM 901, IRM 902 and IRM 903 — are mineral oils with different paraffin and aromatic concentrations. Basically, the effect on elastomers increases as the content of aromatics increases (swelling behaviour). ...
Post a Comment
Read more

Mobil Mobilmet 443

MOBIL MOBILMET 443 is a High Performance Oil-Based Cutting Fluids Product Description   - Mobilmet 440 Series fluids are high performance, multi-service, non-corrosive straight cutting fluids. They are designed for moderate to heave duty cutting operations. They are also suitable for machine tool lubrication and use as hydraulic fluids in specific applications. They are formulated from high quality base oils and chlorine-free additives to provide effective machine performance in a wide variety of moderate to severe operations. They are non-staining to both ferrous and non-ferrous metals during machining. Mobilet 440 Series fluids are formulated to prevent the formation of oil mist in the vicinity of the machine tool, thus contributing to a safer and more pleasant working environment. Features and Benefits   - Mobilmet 440 Series Fluids are designed for a very wide variety of non-corrosive cutting and machining operations that range from moderate ...
Post a Comment
Read more

SHELL VSI 8235

Shell VSI 8235 (Concentrate) PROTECTS AGAINST RUSTING IN ENCLOSED VAPOUR SPACES Shell VSI 8235 (Concentrate) is an oil soluble concentrate that has the ability to protect steel surfaceswhich are above the normal oil level in a system e.g. the vapour spaces in an oil storage tank or the oil reservoir in a circulation system. PERFORMANCE FEATURES - ·          Shell VSI 8235 (Concentrate) contains polar materials which are both oil soluble and also volatile. Thus, as Shell VSI 8235 (Concentrate) is in circulation, the vapour spaces in a system are continuously kept filled with the VSI vapour which is formed by these inhibitors and this vapour continuously blankets metal surfaces to protect them from corrosion. ·          Shell VSI 8235 (Concentrate) should be added to the lubricant contained in the sump or in the oil tank a few hours before the equipment is stopped. For new p...
Post a Comment
Read more