Skip to main content

Fuchs Reniso SP 46


 


Fuchs Reniso SP 46 Is a fully-synthetic refrigeration oil
Fuchs Reniso SP 46 is a Fully synthetic, alkylbenzene-based (AB) refrigeration oils for chlorine-containing refrigerants (RENISO S 68 also for NH3 applications)


Description  -

Particularly good miscibility with HCFC refrigerants, such as R22. Suitable for very low evaporation temperatures down to -80 °C. RENISO SP products are also recommended for use with Drop-In refrigerants (R402A/B, R401A/B, etc.). Due to their excellent stability RENISO S/SP - products are suitable for the lubrication of highly stressed refrigerant compressors.
RENISO SP 220 is especially designed for the lubrication of screw compressors.
This Refrigeration Oil is a high performance fully synthetic refrigeration lubricant specially designed to meet the stringent requirements of most modern refrigeration and air conditioning systems from major equipment manufacturers. This oil is formulated from the highest quality dialkyl benzene base fluids and provide excellent protection against oxidation degradation, wear and rust & corrosion.eCompressedair is an independent supplier of aftermarket compressor replacement parts and is not affiliated with manufacturers mentioned in this web site. Original equipment manufacturer (OEM) names are the trademarks of each manufacturer. On products marked "equivalent" or "replacement," OEM names and part numbers are for reference only. Our Fuchs Reniso SP46 lubricant is formulated from an Alkylbenzene synthetic blend and specifically formulated to function under the most stringent requirements of CFCs, HCFCs refrigerants such as R11, R12, R13, R22, R113, R114, R123, R124, R401a, R401b, R402a, R402b, R403b, R460a, R408a, R409a, R500 R502, R503, and r717.  This product has inherent inertness and enhances system efficiency.

The FUCHS RENISO S/SP series are fully synthetic, alkylbenzene-based refrigeration oils with anti-wear properties for chlorine-containing refrigerants. Sophisticated production processes ensure that the RENISO S/SP products are sulphur- and wax-free. RENISO S/SP products were developed for critical applications especially when good anti-wear properties are required. Compared to equiviscous, mineral oil-based refrigeration oils, the following wear protection values were established: Four ball scardiameter (1 h at 150 N)

RENISO SP 46:
Mineral oil:
0.3 mm
0.6 mm
Almen-Wieland test RENISO SP 46
Mineral oil:
9000 N
1000 N








General Information  -

Because of its additivation the RENISO SP-series is not suitable for the use with ammonia. For NH3 applications we recommend RENISO S 68 which is free of additives.

Specifications  -

RENISO SP 46: NSF H2 registration: registration no. 146751

Advantages  -

• Very high thermal stability
• Excellent ageing and oxidation resistance
• Excellent low-temperature behaviour (flocculation point with R22 < -60 °C)
• Excellent oil-refrigerant solubility (miscibility gap with R22 < -70 °C)
• Excellent wear protection
• Good extreme-pressure (EP/AW) properties


Application  -

RENISO SP products are recommended for use in

·         R22, R502 applications and with drop inrefrigerants
i.e. R401A/B, R402A/B
·         heat pumps used to heat tap water
·         plants where very high compressor outlet
temperatures are encountered.
·         systems operating with R600a (iso-butane) and
R290 (propane)

RENISO S 68 is particularly recommended for R717 (NH3) systems. Because of its good solubility RENISO S/SP oils are recommended for R22 or R22 refrigerant mixtures such as R401A/B and R402A/B.

In general, RENISO S/SP oils are recommended whenever other refrigeration oils provide insufficient protection against wear. RENISO S/SP oils are strongly recommended for lubricating heat pumps.


Looking for any other schmierstoffe product in FUCHS Lubricants or other Lubricant ? Just give us a call.

Source URL: 
https://www.schmierstoffe-online.com/product/fuchs-reniso-sp-46/


Email: info@dm-schmierstoffservice.de
Contact No: +49 8106 3978728


Tags:
Fuchs Reniso SP 46,Fuchs schmierstoffe, Fuchs lubricants, Fuchs lubricant, Fuchs schmierstoff, Fuchs oil, Fuchs motor oil, Fuchs Brake Fluid, Fuchs Fluid

#Lubricants #MotorOil #EngineOil #CrudeOil #Grease #HydraulicOil #SyntheticOil #CarOil #GearOill #Oil #Gas #HydraulicFluid #BrakeFluid #RapeseedOil #TractorOil #CylinderOil #Lubricant #IndustrialLubricants #Fette #MineralOil #TransmissionOil #Petronas #Kluber #Meguin #Castrol


Labels:

Comments

Post a Comment

Popular posts from this blog

ARAL Degol BMB 1200

ARAL Degol BMB 1200 is gear oil type CLPF Recommended Use   - Aral Degol BMB 1200 is a high-performance gear oil with solid lubricant additives (molybdenum disulfide / MoS2). This oil complies with the requirements of DIN 51517-3, and is marked according to DIN 51502 as transmission oil type CLPF. The type and proportion of the MoS2, which is particularly stable, are specially adapted to the base oil and the other additives. Thus, highest efficiency can be achieved over a wide load range. Noteworthy features of this gear oil are in addition to the neutrality towards non-ferrous metals and seals a high thermal stability, good aging resistance and an extremely good corrosion protection. Application   - Aral Degol BMB 1200 is predestined for use in slow-running heavy-duty drives and under heavy shock and vibration loads. It ensures lubrication even if the reaction layers, which have been formed by chemically dissolved active subs...
Post a Comment
Read more

Mobil Mobilmet 443

MOBIL MOBILMET 443 is a High Performance Oil-Based Cutting Fluids Product Description   - Mobilmet 440 Series fluids are high performance, multi-service, non-corrosive straight cutting fluids. They are designed for moderate to heave duty cutting operations. They are also suitable for machine tool lubrication and use as hydraulic fluids in specific applications. They are formulated from high quality base oils and chlorine-free additives to provide effective machine performance in a wide variety of moderate to severe operations. They are non-staining to both ferrous and non-ferrous metals during machining. Mobilet 440 Series fluids are formulated to prevent the formation of oil mist in the vicinity of the machine tool, thus contributing to a safer and more pleasant working environment. Features and Benefits   - Mobilmet 440 Series Fluids are designed for a very wide variety of non-corrosive cutting and machining operations that range from moderate ...
Post a Comment
Read more

Klüber Hotemp Super N Plus

Klüber Hotemp Super N Plus is a special high-temperature oil for continuous wood panel presses Benefits For Your Application   - – Reduced energy consumption and improved efficiency due to advanced additives, even at very high temperatures – No lacquer-like residues formed under continuous total loss lubrication conditions – Low evaporation losses with reduced oil consumption and fume formation – Good adhesion and spreading properties, minimised contamination risk and effective lubricant supply to all friction points Description   - HOTEMP SUPER N PLUS is a special high-temperature oil for use on the latest generation of continuous board presses subject to highest process temperatures and speeds. HOTEMP SUPER N PLUS is an advanced product based on the HOTEMP…series with further development in terms of evaporation losses at temperatures between 230 and 260 °C. No lacquer-like residues are formed under continuous total loss lubrication condition...
Post a Comment
Read more