Skip to main content

Fuchs Titan ATF 10



Fuchs Titan ATF 10 Ist ein ATF für automatische Kfz-Getriebe. Fuchs Titan ATF 10 ist ein High Performance ATF für automatische Kfz-Getriebe, Lenkhilfen und hydraulische Antriebe, für die Automatikgetriebeöle nach GM-Spezifikation TYPE A, Suffix A vorgeschrieben sind.


Beschreibung  -


FUCHS TITAN ATF 10 ist eine Formulierung, die speziell für Anwendungen entwickelt wurde, die ein ATF der alten GM-Spezifikation Type A Suffix A erfordern. BUY FUCHS Titan ATF 10 x 20 litres Titan ATF 10 can be used according to the unit manufacturer’s operating instructions in automatic transmissions, turbo couplings, servo couplings as well as other hydrostatic and hydrodynamic systems.BUY FUCHS Titan ATF 10 x 20 litres. Titan ATF 10 is a formulation developed especially for applications which have to be filled with an ATF meeting the old GM specification Type A Suffix A. Titan ATF 10 offers very good viscosity temperature behaviour and protects against wear. Main application: Titan ATF 10 can be used according to the unit manufacturer’s operating instructions in automatic transmissions, turbo couplings, servo couplings as well as other hydrostatic and hydrodynamic systems. Titan ATF 10 must not be used if DEXRON B or higher nor Ford M2C-33 E/F/G ATF are specified explicitly.

Titan ATF 10, an automatic transmission oil from the development partner and original equipment manufacturer of the automotive industry. FUCHS Titan ATF 10 is a high performance ATF for automatic transmissions, steering aids and hydraulic drives, for which automatic transmission oils according to GM specification TYPE A, suffix A are prescribed. Although the GM TASA specification is no longer valid today, some applications still require products with this performance. Titan ATF 10 must be used in accordance with the instructions of the aggregate manufacturer in automatic transmissions, turbo couplings, servo couplings or other hydrostatic and hydrodynamic systems. Titan ATF 10 must not be used if ATF type DEXRON B or higher or ATF types Ford M2C-33 E / F / G are expressly mentioned as filling instructions.



Anwendung  -

Obwohl die Spezifikation GM TASA heute nicht mehr gültig ist, fordern dennoch einige Anwendungen Produkte mit dieser Performance. TITAN ATF 10 ist gemäß Bedienungsanleitung des Aggregatherstellers einzusetzen in Automatikgetrieben, Turbokupplungen, Servokupplungen oder sonstigen hydrostatischen und hydrodynamischen Systemen. TITAN ATF 10 darf nicht verwendet werden, wenn ATF Type DEXRON B oder höher oder ATF Typen Ford M2C- 33 E/F/G ausdrücklich als Füllvorschrift genannt sind. TITAN ATF 10 ist mischbar und verträglich mit herkömmlichen Getriebenölen. Um die von TITAN ATF 10 gebotenen Vorteile voll auszuschöpfen, sind Vermischungen mit anderen Getriebeölen zu vermeiden, bzw. ein kompletter Ölwechsel bei
Umstellung auf TITAN ATF 10 wird empfohlen. Sicherheits- und Entsorgungshinweise können dem
aktuellen Sicherheitsdatenblatt entnommen werden.



Vorteile  -

• TITAN ATF 10 bietet ein sehr gutes ViskositätsTemperatur- Verhalten und schützt vor Verschleiß.
• TITAN ATF 10 ist oxidationsstabil und wirkt schaumunterdrückend.
• TITAN ATF 10 verhindert Ablagerungen in den damit befüllten Aggregaten und schützt vor                                         Korrosion.
• TITAN ATF 10 ist mischbar und verträglich mit anderen Marken- ATFs Type A Suffix A


Freigaben  -

• MB-FREIGABE 236.2

Fuchs Empfehlungen  -

• TASA
• MAN 339 TYP A


Suchen Sie nach einem anderen Produkt in FUCHS Schmierstoffe oder anderen Schmierstoffe ? Rufen Sie uns einfach an.

Source URL: 
https://schmierstoffe-dm.de/product/fuchs-titan-atf-10/

Email: info@dm-schmierstoffservice.de
Contact No: +49 8106 3978728

Tags:
Fuchs Titan ATF 10, Fuchs schmierstoffe, Fuchs lubricants, Fuchs lubricant, Fuchs schmierstoff, Fuchs oil, Fuchs motor oil, Fuchs Brake Fluid, Fuchs Fluid

#Lubricants #MotorOil #EngineOil #CrudeOil #Grease #HydraulicOil #SyntheticOil #CarOil #GearOill #Oil #Gas #HydraulicFluid #BrakeFluid #RapeseedOil #TractorOil #CylinderOil #Lubricant #IndustrialLubricants #Fette #MineralOil #TransmissionOil #Petronas #Kluber #Meguin #Castrol


Labels:

Comments

Post a Comment

Popular posts from this blog

ARAL Degol BMB 1200

ARAL Degol BMB 1200 is gear oil type CLPF Recommended Use   - Aral Degol BMB 1200 is a high-performance gear oil with solid lubricant additives (molybdenum disulfide / MoS2). This oil complies with the requirements of DIN 51517-3, and is marked according to DIN 51502 as transmission oil type CLPF. The type and proportion of the MoS2, which is particularly stable, are specially adapted to the base oil and the other additives. Thus, highest efficiency can be achieved over a wide load range. Noteworthy features of this gear oil are in addition to the neutrality towards non-ferrous metals and seals a high thermal stability, good aging resistance and an extremely good corrosion protection. Application   - Aral Degol BMB 1200 is predestined for use in slow-running heavy-duty drives and under heavy shock and vibration loads. It ensures lubrication even if the reaction layers, which have been formed by chemically dissolved active subs...
Post a Comment
Read more

Klüber Hotemp Super N Plus

Klüber Hotemp Super N Plus is a special high-temperature oil for continuous wood panel presses Benefits For Your Application   - – Reduced energy consumption and improved efficiency due to advanced additives, even at very high temperatures – No lacquer-like residues formed under continuous total loss lubrication conditions – Low evaporation losses with reduced oil consumption and fume formation – Good adhesion and spreading properties, minimised contamination risk and effective lubricant supply to all friction points Description   - HOTEMP SUPER N PLUS is a special high-temperature oil for use on the latest generation of continuous board presses subject to highest process temperatures and speeds. HOTEMP SUPER N PLUS is an advanced product based on the HOTEMP…series with further development in terms of evaporation losses at temperatures between 230 and 260 °C. No lacquer-like residues are formed under continuous total loss lubrication condition...
Post a Comment
Read more

Mobil Mobilmet 443

MOBIL MOBILMET 443 is a High Performance Oil-Based Cutting Fluids Product Description   - Mobilmet 440 Series fluids are high performance, multi-service, non-corrosive straight cutting fluids. They are designed for moderate to heave duty cutting operations. They are also suitable for machine tool lubrication and use as hydraulic fluids in specific applications. They are formulated from high quality base oils and chlorine-free additives to provide effective machine performance in a wide variety of moderate to severe operations. They are non-staining to both ferrous and non-ferrous metals during machining. Mobilet 440 Series fluids are formulated to prevent the formation of oil mist in the vicinity of the machine tool, thus contributing to a safer and more pleasant working environment. Features and Benefits   - Mobilmet 440 Series Fluids are designed for a very wide variety of non-corrosive cutting and machining operations that range from moderate ...
Post a Comment
Read more