Skip to main content

Fuchs Titan Gear MP 90


 

Fuchs Titan Gear MP 90 Is a single-range mineral gear oil.
Fuchs Titan Gear MP 90 is a Multipurpose gear oil for synchronized and non-synchronized manual gearboxes as well as auxiliary drives, axles and differentials in commercial vehicles and passenger cars.

Description  -

FUCHS TITAN GEAR MP SAE 90 is a mineral Monograde SAE 90 transmission fluid for use in transmissions which demand a GL-4-performance level. High-performance gear oil for synchronized and non-synchronized manual gearboxes as well as auxillary drives, axles and differentials in commercial vehicles and passenger cars.Extreme pressure gear oils, for synchromesh andnon-synchromesh gearboxes and steering gear in vehicles and industrial machinery.EP-gear oils for synchromesh and non-synchromesh gearboxes and steering gear in vehicles and industrial machinery.Excellent protection against wear. The lubricating film remains stable under heavy loads and foaming is minimal at high speeds.

Heavy duty automotive driveline oil suitable for use in final drive units fitted to cars and commercial vehicles. May also be used in certain gearboxes and industrial drives.Outstanding gear protection from the lightest to the heaviest viscosities.Compatible with all seal materials used in gearboxes and final drives.Contain the most effective extreme pressure (EP) agents available.Includes active anti-foam agents to reduce incidence of damage due to air entrainment during use.No loss of performance. Protects all metals normally found in gearboxes against corrosion for the full oil service interval.


Application  -

TITAN GEAR MP SAE 90 can be used as a rationalisation product whenever a SAE 90 API GL 3 or GL 4 oil is specified. TITAN GEAR MP SAE 90 is miscible and compatible with conventional branded gear oils. However, mixing with other gear oils should be avoided in order to fully utilize the product’s benefits. A complete oil change is recommended when converting to TITAN GEAR MP SAE 90. For information on product safety and proper disposal please refer to the latest Material Safety Data Sheet.

Advantages/Benefits  -

·         TITAN GEAR MP SAE 90 offers a highly adhesive, EP lubricating film even in the most unfavourable condition.
·         TITAN GEAR MP SAE 90 is compatible with many elastomers and other sealing materials.
·         TITAN GEAR MP SAE 90 inhibits corrosion on metals normally found in gearboxes.
·         TITAN GEAR MP SAE 90 offers good oxidation resistance.
·         TITAN GEAR MP SAE 90 offers very good protection against wear.
·         TITAN GEAR MP SAE 90 suppresses foaming even at high speeds.
Specifications  -
·         API GL-4


FUCHS Recommendations  -

·         MAN 341 TYPE E1, Z1
·         MB 235.1
·         ZF TE-ML 02A, 16A, 17A, 19A



Looking for any other schmierstoffe product in FUCHS Lubricants or other Lubricant ? Just give us a call.


Source URL: 
https://www.schmierstoffe-online.com/product/fuchs-titan-gear-mp-90/

Email: info@dm-schmierstoffservice.de
Contact No: +49 8106 3978728


Tags:
Fuchs Titan Gear MP 90,Fuchs schmierstoffe, Fuchs lubricants, Fuchs lubricant, Fuchs schmierstoff, Fuchs oil, Fuchs motor oil, Fuchs Brake Fluid, Fuchs Fluid

#Lubricants #MotorOil #EngineOil #CrudeOil #Grease #HydraulicOil #SyntheticOil #CarOil #GearOill #Oil #Gas #HydraulicFluid #BrakeFluid #RapeseedOil #TractorOil #CylinderOil #Lubricant #IndustrialLubricants #Fette #MineralOil #TransmissionOil #Petronas #Kluber #Meguin #Castrol


Labels:

Comments

Post a Comment

Popular posts from this blog

ARAL Degol BMB 1200

ARAL Degol BMB 1200 is gear oil type CLPF Recommended Use   - Aral Degol BMB 1200 is a high-performance gear oil with solid lubricant additives (molybdenum disulfide / MoS2). This oil complies with the requirements of DIN 51517-3, and is marked according to DIN 51502 as transmission oil type CLPF. The type and proportion of the MoS2, which is particularly stable, are specially adapted to the base oil and the other additives. Thus, highest efficiency can be achieved over a wide load range. Noteworthy features of this gear oil are in addition to the neutrality towards non-ferrous metals and seals a high thermal stability, good aging resistance and an extremely good corrosion protection. Application   - Aral Degol BMB 1200 is predestined for use in slow-running heavy-duty drives and under heavy shock and vibration loads. It ensures lubrication even if the reaction layers, which have been formed by chemically dissolved active subs...
Post a Comment
Read more

Klüber Hotemp Super N Plus

Klüber Hotemp Super N Plus is a special high-temperature oil for continuous wood panel presses Benefits For Your Application   - – Reduced energy consumption and improved efficiency due to advanced additives, even at very high temperatures – No lacquer-like residues formed under continuous total loss lubrication conditions – Low evaporation losses with reduced oil consumption and fume formation – Good adhesion and spreading properties, minimised contamination risk and effective lubricant supply to all friction points Description   - HOTEMP SUPER N PLUS is a special high-temperature oil for use on the latest generation of continuous board presses subject to highest process temperatures and speeds. HOTEMP SUPER N PLUS is an advanced product based on the HOTEMP…series with further development in terms of evaporation losses at temperatures between 230 and 260 °C. No lacquer-like residues are formed under continuous total loss lubrication condition...
Post a Comment
Read more

Mobil Mobilmet 443

MOBIL MOBILMET 443 is a High Performance Oil-Based Cutting Fluids Product Description   - Mobilmet 440 Series fluids are high performance, multi-service, non-corrosive straight cutting fluids. They are designed for moderate to heave duty cutting operations. They are also suitable for machine tool lubrication and use as hydraulic fluids in specific applications. They are formulated from high quality base oils and chlorine-free additives to provide effective machine performance in a wide variety of moderate to severe operations. They are non-staining to both ferrous and non-ferrous metals during machining. Mobilet 440 Series fluids are formulated to prevent the formation of oil mist in the vicinity of the machine tool, thus contributing to a safer and more pleasant working environment. Features and Benefits   - Mobilmet 440 Series Fluids are designed for a very wide variety of non-corrosive cutting and machining operations that range from moderate ...
Post a Comment
Read more