Skip to main content

Total Dacnis SE 100



Total Dacnis SE 100 Is a Di-ester synthetic oils for air compressors.

Description  -

Total Dacnis Se 100  is a high performance lubricant developed for lubrication and cooling of the following types of air compressors: high pressure reciprocating air compressor (ISO VG 100), screw and rotary vane air compressor (ISO VG 46, 68 or 100), turbocompressors (ISO VG 68), vacuum pumps (ISO VG 100).

Total Dacnis Se 100  - synthetic oil for air compressors, made on the basis of diester. What is it used for? The oil perfectly lubricates and cools the following types of air compressors: - high pressure piston air compressors; - turbochargers; - rotary and screw air compressors. Total Dacnis Se 100 can also be used to lubricate vacuum pumps. Specifications: DIN 51 506 VDL NF-ISO 6743, classified according to the DAC and DAJ standards for harsh environments. The advantages of the DOT-NIS SE oil from TOTAL are: - excellent thermal stability even at the highest possible working temperature; - oil does not foam during use in turbo compressors; - guaranteed start of the compressor even at -20 ° C; - DACNIS SE stably performs its functions when heated to + 250 ° С, with simultaneous pressure up to 200 bar. Total Dacnis Se 100  oil is a high performance when working in the most extreme conditions! Performance characteristics: Country of origin - France Type of oil - synthetic Oil type - compressor Kinematic viscosity at 40 ° C - 100 mm2 / s Density at 15 ° C - 960 kg / m3 Viscosity index - 90 Flash point - 278 ° C Pour point - - 30 ° С



Applications  -

DACNIS SE is a high performance lubricant developed for lubrication and cooling of the following types of air compressors:

– high pressure reciprocating air compressor (ISO VG 100)
– screw and rotary vane air compressor (ISO VG 46, 68 or 100)
– turbocompressors (ISO VG 68)
– vacuum pumps (ISO VG 100).

Specifications  -

International specifications
·         ISO 6743 classified DAC and DAJ for heavy duty applications.
·         DACNIS SE meets the DIN 51 506 VDL requirements.\





Advantages  -

Performances under heavy duty conditions Wide operating conditions
·         Excellent thermal stability of the lubricant under high temperature conditions.
·         Low foaming tendency for turbocompressor applications.
·         Low volatility.
·         Low vanish and carbon deposits.
·         Protection against rust and corrosion.
·         Compressor start up by – 20°C.
·         Operating conditions at discharge temperature up to 250°C and discharge pressure up to 200 bars.

Looking for any other schmierstoffe product in TOTAL OIL & LUBRICANTS or other Lubricant ? Just give us a call.


Source URL: 
https://www.schmierstoffe-online.com/product/total-dacnis-se-100/

Email: info@dm-schmierstoffservice.de
Contact No: +49 8106 3978728

Tags:
Total Dacnis SE 100,Total schmierstoffe, Total lubricants, Total lubricant, Total schmierstoff, Total oil, Total motor oil, Total Brake Fluid, Total Fluid

#Lubricants #MotorOil #EngineOil #CrudeOil #Grease #HydraulicOil #SyntheticOil #CarOil #GearOill #Oil #Gas #HydraulicFluid #BrakeFluid #RapeseedOil #TractorOil #CylinderOil #Lubricant #IndustrialLubricants #Fette #MineralOil #TransmissionOil #Petronas #Kluber #Meguin #Castrol

Labels:

Comments

Post a Comment

Popular posts from this blog

Fuchs Referenzfluessigkeit IRM 903

Fuchs Referenzfluessigkeit IRM 903 is a reference oil, IRM REFERENCE OILS per ASTM D 471-06 Description   - The ASTM standard test method D 471-06 deals with the effect of liquids on elastomers (“Rubber Property – Effect of Liquids”). Besides describing the procedures for various elastomer tests, it lists standard test liquids with which reference measurements can be performed. The ASTM D 471-06 method divides the standard test liquids into three groups: ·          IRM reference oils ·          ASTM reference fuels ·          ASTM service liquids IRM Reference oils   - The reference oils listed under IRM — IRM 901, IRM 902 and IRM 903 — are mineral oils with different paraffin and aromatic concentrations. Basically, the effect on elastomers increases as the content of aromatics increases (swelling behaviour). ...
Post a Comment
Read more

Mobil Mobilmet 443

MOBIL MOBILMET 443 is a High Performance Oil-Based Cutting Fluids Product Description   - Mobilmet 440 Series fluids are high performance, multi-service, non-corrosive straight cutting fluids. They are designed for moderate to heave duty cutting operations. They are also suitable for machine tool lubrication and use as hydraulic fluids in specific applications. They are formulated from high quality base oils and chlorine-free additives to provide effective machine performance in a wide variety of moderate to severe operations. They are non-staining to both ferrous and non-ferrous metals during machining. Mobilet 440 Series fluids are formulated to prevent the formation of oil mist in the vicinity of the machine tool, thus contributing to a safer and more pleasant working environment. Features and Benefits   - Mobilmet 440 Series Fluids are designed for a very wide variety of non-corrosive cutting and machining operations that range from moderate ...
Post a Comment
Read more

SHELL VSI 8235

Shell VSI 8235 (Concentrate) PROTECTS AGAINST RUSTING IN ENCLOSED VAPOUR SPACES Shell VSI 8235 (Concentrate) is an oil soluble concentrate that has the ability to protect steel surfaceswhich are above the normal oil level in a system e.g. the vapour spaces in an oil storage tank or the oil reservoir in a circulation system. PERFORMANCE FEATURES - ·          Shell VSI 8235 (Concentrate) contains polar materials which are both oil soluble and also volatile. Thus, as Shell VSI 8235 (Concentrate) is in circulation, the vapour spaces in a system are continuously kept filled with the VSI vapour which is formed by these inhibitors and this vapour continuously blankets metal surfaces to protect them from corrosion. ·          Shell VSI 8235 (Concentrate) should be added to the lubricant contained in the sump or in the oil tank a few hours before the equipment is stopped. For new p...
Post a Comment
Read more