Skip to main content

Castrol Syntrans FE 75W



Castrol Syntrans FE 75W is a Gearoil.
Castrol Syntrans FE 75W is an efficient Manual Transmission Fluid.

Description  -

Castrol Syntrans FE 75W is a full synthetic transmission fluid recommended for most passenger car conventional manual and “dry clutch” transmissions where API GL 4 lubricants are required. It is approved for use where Ford WSSM2C200-D2 is specified. Ford Focus, C-Max, Mondeo, S-Max, Galaxy, Transit. Volvo C30, S40, V50, S60, V70, C70, XC60, XC70.Suitable in most manual transmissions where an automatic transmission fluid is recommended. It has much stronger wear performance than virtually all automatic transmission fluids and also retains viscosity in service exceptionally well.

Syntrans FE 75W is a low viscosity fully synthetic fuel efficient manual transmission fluid recommended for most passenger car (Mercedes, Ford, Honda, Opel/Vauxhall, Saab, Fiat, Renault, PSA and Volvo) conventional manual and “dry clutch” transmissions where SAE 75W and API GL-4 lubricants are required. Syntrans FE 75W manual transmission fluid is approved for use where Ford WSS-M2C200-D2 (Ford and Volvo) is specified. Suitable in most manual transmissions where an automatic transmission fluid is recommended. It has much stronger wear performance than virtually all automatic transmission fluids and also retains viscosity in service exceptionally well. Syntrans FE 75W manual transmission fluid is a recommended transmission fluid by Getrag for use in Ford Focus, C-Max, Kuga, Mondeo, S-Max, Galaxy, Transit conventional 6-speed GFT (Getrag-Ford transmissions) gearboxes (the label has a marking of MMT6) and Volvo C30, C70, XC60, XC70, S40, S60, V70 conventional gearboxes (the label has a marking of M45, M46, M47 4-speed gearbox, M56, M58, M59 5-speed gearbox, M66 6-speed gearbox). Syntrans FE 75W manual transmission fluid is equal to Ford factory fill transmission fluid with Ford spare part nr 7U7JM2C200 BA and Volvo spare part nr 31280771 (1161645) for 1l pack and 31280772 for 4l pack. Please refer to the specifications section in vehicle Owners Manual when choosing transmission fluid.



Advantages  -

·         Low viscosity synthetic formulation offers the potential for fuel economy benefits while maintaining excellent wear protection.
·         Extremely good cold flow properties provides added protection on start up and improves shift quality.
·         Excellent frictional characteristics extends synchroniser life and improves shift comfort.
·         High shear stability maintains performance over the lifetime of the lubricant.
·         Excellent high temperature stability maintains transmission cleanliness prolonging the life of transmission and lubricant.
·         Excellent wear protection alternative to automatic transmission fluid in manual transmissions


Product Performance Claims  -

·         API GL-4
·         Ford WSS-M2C200-D2
·         MB-Approval 235.73

Looking for any other schmierstoffe product in CASTROL ENGINE OIL & LUBRICANTS or other Lubricant ? Just give us a call.

Source URL -
https://www.schmierstoffe-online.com/product/castrol-syntrans-fe-75w/

Email: info@dm-schmierstoffservice.de
Contact No: +49 8106 3978728

Tags:
Castrol Syntrans FE 75W,Castrol schmierstoffe, Castrol lubricants, Castrol lubricant, Castrol schmierstoff, Castrol oil, Castrol motor oil, Castrol Brake Fluid, Castrol Fluid

#Lubricants #MotorOil #EngineOil #CrudeOil #Grease #HydraulicOil #SyntheticOil #CarOil #GearOill #Oil #Gas #HydraulicFluid #BrakeFluid #RapeseedOil #TractorOil #CylinderOil #Lubricant #IndustrialLubricants #Fette #MineralOil #TransmissionOil #Petronas #Kluber #Meguin #Castrol


Labels:

Comments

Post a Comment

Popular posts from this blog

ARAL Degol BMB 1200

ARAL Degol BMB 1200 is gear oil type CLPF Recommended Use   - Aral Degol BMB 1200 is a high-performance gear oil with solid lubricant additives (molybdenum disulfide / MoS2). This oil complies with the requirements of DIN 51517-3, and is marked according to DIN 51502 as transmission oil type CLPF. The type and proportion of the MoS2, which is particularly stable, are specially adapted to the base oil and the other additives. Thus, highest efficiency can be achieved over a wide load range. Noteworthy features of this gear oil are in addition to the neutrality towards non-ferrous metals and seals a high thermal stability, good aging resistance and an extremely good corrosion protection. Application   - Aral Degol BMB 1200 is predestined for use in slow-running heavy-duty drives and under heavy shock and vibration loads. It ensures lubrication even if the reaction layers, which have been formed by chemically dissolved active subs...
Post a Comment
Read more

Klüber Hotemp Super N Plus

Klüber Hotemp Super N Plus is a special high-temperature oil for continuous wood panel presses Benefits For Your Application   - – Reduced energy consumption and improved efficiency due to advanced additives, even at very high temperatures – No lacquer-like residues formed under continuous total loss lubrication conditions – Low evaporation losses with reduced oil consumption and fume formation – Good adhesion and spreading properties, minimised contamination risk and effective lubricant supply to all friction points Description   - HOTEMP SUPER N PLUS is a special high-temperature oil for use on the latest generation of continuous board presses subject to highest process temperatures and speeds. HOTEMP SUPER N PLUS is an advanced product based on the HOTEMP…series with further development in terms of evaporation losses at temperatures between 230 and 260 °C. No lacquer-like residues are formed under continuous total loss lubrication condition...
Post a Comment
Read more

Mobil Mobilmet 443

MOBIL MOBILMET 443 is a High Performance Oil-Based Cutting Fluids Product Description   - Mobilmet 440 Series fluids are high performance, multi-service, non-corrosive straight cutting fluids. They are designed for moderate to heave duty cutting operations. They are also suitable for machine tool lubrication and use as hydraulic fluids in specific applications. They are formulated from high quality base oils and chlorine-free additives to provide effective machine performance in a wide variety of moderate to severe operations. They are non-staining to both ferrous and non-ferrous metals during machining. Mobilet 440 Series fluids are formulated to prevent the formation of oil mist in the vicinity of the machine tool, thus contributing to a safer and more pleasant working environment. Features and Benefits   - Mobilmet 440 Series Fluids are designed for a very wide variety of non-corrosive cutting and machining operations that range from moderate ...
Post a Comment
Read more