Skip to main content

Fuchs Anticorit Synth


 

Fuchs Anticorit Synth Is a fully-synthetic corrosion spray 
Fuchs Anticorit Synth is an Universal Corrosion Protection Oil


Description  -

FUCHS ANTICORIT SYNTH is based on fully synthetic universal oil with mild odour and excellent penetration properties. The product leaves a thin oily and transparent film with an outstanding corrosion protection. This film can be removed easily with low alkaline cleaners. Best on the unique lubrication effect squeaking and stick-slip effects will be minimised. The dewatering effect and excellent cleaning ability of ANTICORIT SYNTH secures electrical contacts, this means the product can be used for initial aid of engines. The product can be applied as a simple cutting oil, too.



The areas of application of this universal corrosion protection spray range from industry, workshops, to the household up to the sports and hobby area. The Anticorit Synth Spray is sprayed directly onto the part to be preserved. It creeps perfectly in joints and crevices. After drying, a thin, non-resinated, highly effective protective film remains. This spray is equipped with a ball valve and a spray hose so that it can be sprayed from any position. The indicated characteristic values ​​refer to the propellant-free product. which thanks to its excellent creeping action is able to loosen even rusted or stuck mechanics. It leaves an oily, transparent, non-sticky film, with the best corrosion protection properties, which is easy to remove with neutral or slightly alkaline cleaners.




ANTICORIT SYNTH SPRAY is applied directly on the surface. It penetrates excellent in gaps and jointing’s. After drying, the product forms a highly effective, thin and a not resinifying protection film. The spray can is equipped with a ball valve and a sprinkler hose, an application out of every position is herewith possible. The typical properties listed in the table reflecting the pure product without blowing gas.ANTICORIT SYNTH is free of silicones, Teflon, graphite, MoS2, CFC and heavy metals.












Application  -


ANTICORIT SYNTH can be used in the industry, in service garages, in housekeeping and in sports or hobby fields.Application is possible by wipping, brushing, dipping or spraying. The security standards have to be considered.

which is able to loosen even rusty or stuck mechanics with its excellent creeping action. It leaves an oily, transparent, non-sticky film, with the best corrosion protection properties, which is easy to remove with neutral or slightly alkaline cleaners. Due to the unique lubricating effect, a squeaking and creaking of moving parts is significantly minimized. Due to the very good moisture displacement and the excellent cleaning power of Anticorit Synth Spray electrical contacts can be secured and thus this product also helps with engine start. The selected additives also make it possible to use it as a simple cutting oil. The Anticorit Synth Spray is free of silicone, Teflon, graphite, MoS2, CFC and heavy metals. It is biodegradable quickly.



Benefits  -

• Stops squeaking and stick-slip effects
• Outstanding corrosion protection
• Dissolves tight or corroded connections
• Can be used as cutting oil
• Dewatering effect
• Secures electrical contacts
• Lubricating and cleaning effect
• Free of silicon, Teflon, graphite, MoS2, CFC and heavy metals


Storage Conditions  -

ANTICORIT SYNTH can be stored, if sealed in the original container, up to 36 months at temperatures between – 20 °C to + 40 °C.

The indication of a minimum period of storage does not include any guarantee of durability.



Looking for any other schmierstoffe product in FUCHS Lubricants or other Lubricant ? Just give us a call.

Source URL: 
https://www.schmierstoffe-online.com/product/fuchs-anticorit-synth/
Email: info@dm-schmierstoffservice.de
Contact No: +49 8106 3978728

Tags:
Fuchs Anticorit Synth, Fuchs schmierstoffe, Fuchs lubricants, Fuchs lubricant, Fuchs schmierstoff, Fuchs oil, Fuchs motor oil, Fuchs Brake Fluid, Fuchs Fluid

#Lubricants #MotorOil #EngineOil #CrudeOil #Grease #HydraulicOil #SyntheticOil #CarOil #GearOill #Oil #Gas #HydraulicFluid #BrakeFluid #RapeseedOil #TractorOil #CylinderOil #Lubricant #IndustrialLubricants #Fette #MineralOil #TransmissionOil #Petronas #Kluber #Meguin #Castrol

Labels:

Comments

Post a Comment

Popular posts from this blog

ARAL Degol BMB 1200

ARAL Degol BMB 1200 is gear oil type CLPF Recommended Use   - Aral Degol BMB 1200 is a high-performance gear oil with solid lubricant additives (molybdenum disulfide / MoS2). This oil complies with the requirements of DIN 51517-3, and is marked according to DIN 51502 as transmission oil type CLPF. The type and proportion of the MoS2, which is particularly stable, are specially adapted to the base oil and the other additives. Thus, highest efficiency can be achieved over a wide load range. Noteworthy features of this gear oil are in addition to the neutrality towards non-ferrous metals and seals a high thermal stability, good aging resistance and an extremely good corrosion protection. Application   - Aral Degol BMB 1200 is predestined for use in slow-running heavy-duty drives and under heavy shock and vibration loads. It ensures lubrication even if the reaction layers, which have been formed by chemically dissolved active subs...
Post a Comment
Read more

Klüber Hotemp Super N Plus

Klüber Hotemp Super N Plus is a special high-temperature oil for continuous wood panel presses Benefits For Your Application   - – Reduced energy consumption and improved efficiency due to advanced additives, even at very high temperatures – No lacquer-like residues formed under continuous total loss lubrication conditions – Low evaporation losses with reduced oil consumption and fume formation – Good adhesion and spreading properties, minimised contamination risk and effective lubricant supply to all friction points Description   - HOTEMP SUPER N PLUS is a special high-temperature oil for use on the latest generation of continuous board presses subject to highest process temperatures and speeds. HOTEMP SUPER N PLUS is an advanced product based on the HOTEMP…series with further development in terms of evaporation losses at temperatures between 230 and 260 °C. No lacquer-like residues are formed under continuous total loss lubrication condition...
Post a Comment
Read more

Mobil Mobilmet 443

MOBIL MOBILMET 443 is a High Performance Oil-Based Cutting Fluids Product Description   - Mobilmet 440 Series fluids are high performance, multi-service, non-corrosive straight cutting fluids. They are designed for moderate to heave duty cutting operations. They are also suitable for machine tool lubrication and use as hydraulic fluids in specific applications. They are formulated from high quality base oils and chlorine-free additives to provide effective machine performance in a wide variety of moderate to severe operations. They are non-staining to both ferrous and non-ferrous metals during machining. Mobilet 440 Series fluids are formulated to prevent the formation of oil mist in the vicinity of the machine tool, thus contributing to a safer and more pleasant working environment. Features and Benefits   - Mobilmet 440 Series Fluids are designed for a very wide variety of non-corrosive cutting and machining operations that range from moderate ...
Post a Comment
Read more