Skip to main content

Fuchs Plantosyn 3268


 


Fuchs Plantosyn 3268 Is a HVI multigrade hydraulic oil
Fuchs Plantosyn 3268 is an Environmentally friendly, HVI multigrade hydraulic oil with high temperature stability based on fully-saturated, synthetic esters (HEES), rapidly biodegradable according to OECD 301 B > 60%


Description  -


FUCHS PLANTOSYN 3268 is an environmentally friendly, high-performance hydraulic and lubricating oil based on saturated synthetic esters. It is designed for the toughest demands in construction machinery, earth moving equipment, forestry and agriculture machineries. Suitable also for loading cranes, floor conveyor vehicles and hydraulic platform systems in trucks.


PLANTOSYN 3268 is the environmentally friendly alternative to mineral oil based hydraulic fluids.


PLANTOSYN 3268 is recommended by leading manufacturers of machinery and hydraulic components. The product is not water-soluble. If leakage occurs or oil is lost, e.g. if a hydraulic hose
bursts, PLANTOSYN 3268 is held largely in the upper layers of the soil, where it is rapidly biodegraded. PLANTOSYN 3268 is rapidly
biodegradable, > 60% according to the world-wide accepted OECD 301 B test.



Application  -


PLANTOSYN 3268 is recommended for use in hydraulic systems which require engine oils or hydraulic fluids of corresponding viscosity classes (ISO VG 32, 46, 68). The operating temperatures
should be between – 30 °C and 100 °C.Temperatures above 100 °C are permitted for a short period. After changing over to PLANTOSYN 3268, the oil filters in the hydraulic system should be inspected after 50 hours of operation and be replaced if
necessary, in the interest of operating safety. The change-over guidelines according to ISO 15380 should be observed.






Advantages  -


• Awarded with the European Ecolabel
• Rapidly biodegradable acc. to OECD 301 B, > 60%
• Excellent ageing stability
• Excellent low-temperature behaviour
• Miscible with mineral oil and polyalphaolefin
• Oil drain intervals can be extended
• Excellent shear stability, no shearing
• Based on saturated synthetic esters (HEES)
• High viscosity index



Specifications/Approvals  -


• ISO 15380: HEES
• DIN 51524-3: HVLP 1)
• DIN 51519: ISO VG 46
• O&K Baumaschinen
• FENDT




FUCHS Recommendations  -


• BOSCH REXROTH AG
• CAT BF-1
• KRAMER ALLRAD
• PALFINGER
• SAUER DANFOSS
• TIMBERJACK
• VALMET / KOMATSU FOREST
• PONSSE

Looking for any other schmierstoffe product in FUCHS Lubricants or other Lubricant ? Just give us a call.

Source URL: 
https://www.schmierstoffe-online.com/product/fuchs-plantosyn-3268/

Email: info@dm-schmierstoffservice.de
Contact No: +49 8106 3978728

Tags:
Fuchs Plantosyn 3268, Fuchs schmierstoffe, Fuchs lubricants, Fuchs lubricant, Fuchs schmierstoff, Fuchs oil, Fuchs motor oil, Fuchs Brake Fluid, Fuchs Fluid

#Lubricants #MotorOil #EngineOil #CrudeOil #Grease #HydraulicOil #SyntheticOil #CarOil #GearOill #Oil #Gas #HydraulicFluid #BrakeFluid #RapeseedOil #TractorOil #CylinderOil #Lubricant #IndustrialLubricants #Fette #MineralOil #TransmissionOil #Petronas #Kluber #Meguin #Castrol

Labels:

Comments

Post a Comment

Popular posts from this blog

Fuchs Renolin 504 VDL 100

Fuchs Renolin 504 VDL 100 is an air Compressor Oil and Gas Compressor Oil Description   - FUCHS RENOLIN 500 Series can be used in air compressors and can also be used in compressors working with hydrocarbon gas e.g. natural gas (different composition), propane, propen and process gas. The products of the RENOLIN 500 Series are air compressor oils for piston and rotation compressors according to DIN 51506 Type VDL. The RENOLIN 500 Series is formulated on the basis of especially highly refined base oils; the additives select make possible reliable use at high thermal stress without the formation of damaging residue. Intensified laboratory tests and many years of experience with use confirm the extraordinary oxidation stability of these special compressor oils. Fuchs Renolin 504 VDL 100 is made from highly refined mineral oils and a special additive package that gives this product exceptional oxidation stability under high thermal loads. Fox Re...
Post a Comment
Read more

Why You Should Go for Megol Gearoil Synth ISO VG 220?

What are the essential requirements you need to check when you are looking for high quality lubricants? Well, there are many things you need to take care of, but one of the most important things that you need to look out is the lubrication and wear prevention properties of the lubricants and if you are looking for such properties, just go for Schmierstoffe service’s megol Gearoil Synth ISO VG 220 , an EP lubricant that has all the answers of your questions and are best suitable for your industrial gearboxes and roller and plain bearings. It has excellent wear protection properties as well as good lubricant endurance and specific oil consumption. All you need to do is to just buy it and that is all. Meguin Getriebeoel CLPF 220 is another name you can look forward to when you are looking for EP lubricant with specially stabilized molykote. For best circular lubrication systems, it serves the core purpose. If you are looking for more information on the subject, you can visi...
Post a Comment
Read more

ARAL Degol BMB 1200

ARAL Degol BMB 1200 is gear oil type CLPF Recommended Use   - Aral Degol BMB 1200 is a high-performance gear oil with solid lubricant additives (molybdenum disulfide / MoS2). This oil complies with the requirements of DIN 51517-3, and is marked according to DIN 51502 as transmission oil type CLPF. The type and proportion of the MoS2, which is particularly stable, are specially adapted to the base oil and the other additives. Thus, highest efficiency can be achieved over a wide load range. Noteworthy features of this gear oil are in addition to the neutrality towards non-ferrous metals and seals a high thermal stability, good aging resistance and an extremely good corrosion protection. Application   - Aral Degol BMB 1200 is predestined for use in slow-running heavy-duty drives and under heavy shock and vibration loads. It ensures lubrication even if the reaction layers, which have been formed by chemically dissolved active subs...
Post a Comment
Read more