Skip to main content

Fuchs Renolin Anti stick slip



FUCHS RENOLIN ANTI-STICK-SLIP is an Anti-Stick-slip Additive

Description  -

In hydraulic systems and components with low sliding velocities  and  high  pressures,  often stick-slip phenomena  occur.Therefore  hydraulic cylinders cannot be positioned  exactly.RENOLIN Anti-Stick Slip provides a stable and adhesive lubricating  film even in micro-feed situations, and when pressures are high. This good lubricating film eliminates chattering – instable lubricating films – under mixed-friction conditions,  which prevents the cylinder packages,elastomers and sealing materials from being destroyed.  FUCHS RENOLIN  Anti-Stick-Slip  contains  a selected  additive  combination which creates surface- active layers which lead to low friction coefficients and which  avoid  stick-slip  phenomena (e.g.in hydraulic elevators,hydraulic cylinders,  valves,  etc.). A relatively  easy  and  simple  addition  of  2%  of  the concentrate  to  a  conventional hydraulic fluid (based on mineral oil or polyalphaolefin) reduces the danger of chattering, stick-slip.  RENOLIN  Anti-Stick-Slip  is miscible  and  compatible with conventional  hydraulic fluids based on mineral oils,hydro-treated  oils or polyalphaolefins.

In many hydraulic systems, stick-slip effects (chattering) occur, especially at low sliding speeds and high loads. As a result, hydraulic cylinders can not be accurately positioned and the hydraulics can not work exactly. Stick-slip phenomena mean an outline of the lubricating film. This can cause damage to the cylinder packs, elastomers and seals.FUCHS RENOLIN anti-stick panties prevent these unwanted effects. RENOLIN Anti-Stick-Slip is an additive combination specially developed for hydraulic systems to avoid stick-slip effects (for example in hydraulic lifts, hydraulic cylinders, valves, etc.). Adding approx. 2% of this additive concentrate to the hydraulic oil significantly reduces the risk of stick slip. RENOLIN Anti-Stick-Slip is miscible with all conventional hydraulic oils based on mineral oils, hydrogenated mineral base oils or polyalphaolefins compatible.



The information in this product information is based on the general experience and knowledge of FUCHS SCHMIERSTOFFE GMBH in the development and production of lubricants and corresponds to our present state of knowledge. The mode of action of our products depends on a variety of factors, in particular the concrete application, the application of the products, the operating conditions, the pre-treatment of the component, possible contamination from the outside, etc. For this reason, generally valid statements on the function of our products are not possible. Our products may not be used in aircraft / spacecraft or parts thereof.This does not apply if the products are removed before installation of components in an aircraft / spacecraft. The information in this product information is a general, non-binding guideline. Under no circumstances, however, does it imply any warranty of characteristics or a guarantee of the suitability of the product for the individual case.

Application  -

RENOLIN  Anti-Stick-Slip  can  be  added  in  a concentration of 2% to conventional hydraulic fluids (it is recommended to make a pre-solution of the additive with the oil). RENOLIN Anti-Stick-Slip has been used successfully  in  hydraulic  systems  of  elevators, forklifts, agricultural machinery, platform lifts, hydraulic vibration dampers, etc.

Advantages  -


•  Avoids stick-slip phenomena
•  Excellent compatibility with plastic materials and elastomers
•  Extremely low friction coefficient
•  Reduces chattering effects in hydraulic cylinders
•  Builds stable lubricating films
•  Good miscibility with mineral oil-based hydraulic fluids and polyalphaolefin-based hydraulic fluids
•  Easy to handle

Looking for any other schmierstoffe product in FUCHS Lubricants or other Lubricant  ? Just give us a call.

Source URL: 
https://www.schmierstoffe-online.com/product/fuchs-renolin-anti-stick-slip/


Email: info@dm-schmierstoffservice.de
Contact No: +49 8106 3978728

Tags:
Fuchs Renolin Anti-stick-slip, Fuchs schmierstoffe, Fuchs lubricants, Fuchs lubricant, Fuchs schmierstoff, Fuchs oil, Fuchs motor oil, Fuchs Brake Fluid, Fuchs Fluid


#Lubricants #MotorOil #EngineOil #CrudeOil #Grease #HydraulicOil #SyntheticOil #CarOil #GearOill #Oil #Gas #HydraulicFluid #BrakeFluid #RapeseedOil #TractorOil #CylinderOil #Lubricant #IndustrialLubricants #Fette #MineralOil #TransmissionOil #Petronas #Kluber #Meguin #Castrol


Labels:

Comments

Post a Comment

Popular posts from this blog

ARAL Degol BMB 1200

ARAL Degol BMB 1200 is gear oil type CLPF Recommended Use   - Aral Degol BMB 1200 is a high-performance gear oil with solid lubricant additives (molybdenum disulfide / MoS2). This oil complies with the requirements of DIN 51517-3, and is marked according to DIN 51502 as transmission oil type CLPF. The type and proportion of the MoS2, which is particularly stable, are specially adapted to the base oil and the other additives. Thus, highest efficiency can be achieved over a wide load range. Noteworthy features of this gear oil are in addition to the neutrality towards non-ferrous metals and seals a high thermal stability, good aging resistance and an extremely good corrosion protection. Application   - Aral Degol BMB 1200 is predestined for use in slow-running heavy-duty drives and under heavy shock and vibration loads. It ensures lubrication even if the reaction layers, which have been formed by chemically dissolved active subs...
Post a Comment
Read more

Klüber Hotemp Super N Plus

Klüber Hotemp Super N Plus is a special high-temperature oil for continuous wood panel presses Benefits For Your Application   - – Reduced energy consumption and improved efficiency due to advanced additives, even at very high temperatures – No lacquer-like residues formed under continuous total loss lubrication conditions – Low evaporation losses with reduced oil consumption and fume formation – Good adhesion and spreading properties, minimised contamination risk and effective lubricant supply to all friction points Description   - HOTEMP SUPER N PLUS is a special high-temperature oil for use on the latest generation of continuous board presses subject to highest process temperatures and speeds. HOTEMP SUPER N PLUS is an advanced product based on the HOTEMP…series with further development in terms of evaporation losses at temperatures between 230 and 260 °C. No lacquer-like residues are formed under continuous total loss lubrication condition...
Post a Comment
Read more

Mobil Mobilmet 443

MOBIL MOBILMET 443 is a High Performance Oil-Based Cutting Fluids Product Description   - Mobilmet 440 Series fluids are high performance, multi-service, non-corrosive straight cutting fluids. They are designed for moderate to heave duty cutting operations. They are also suitable for machine tool lubrication and use as hydraulic fluids in specific applications. They are formulated from high quality base oils and chlorine-free additives to provide effective machine performance in a wide variety of moderate to severe operations. They are non-staining to both ferrous and non-ferrous metals during machining. Mobilet 440 Series fluids are formulated to prevent the formation of oil mist in the vicinity of the machine tool, thus contributing to a safer and more pleasant working environment. Features and Benefits   - Mobilmet 440 Series Fluids are designed for a very wide variety of non-corrosive cutting and machining operations that range from moderate ...
Post a Comment
Read more