Skip to main content

Fuchs Ecocool R – Ferrostar MB


 


Fuchs Ecocool R – Ferrostar MB is a water-miscible cooling lubricant.



Description  -


FUCHS ECOCOOL R – FERROSTAR MB is a premiumquality, biocide-free, mineral oil-based, water-miscible cutting fluid,optimized for machining of cast iron, nodular cast iron and steel.ECOCOOL R – FERROSTAR MB produces a longlife, stable, finely dispers emulsion when mixed with water. The use of high-quality and carefully matched base oils, emulsifiers, corrosion inhibitors and other additives give ECOCOOL R – FERROSTAR MB extraordinary properties.

ECOCOOL R  FERROSTAR is a premium quality, mineral oil based, boron and biocide free, water miscible grinding and cutting fluid, optimised for machining of cast iron, nodular cast iron, and steel. Produces a long-life, stable, finely dispersed emulsion when mixed with water. The use of high quality and carefully matched base oils, emulsifiers, corrosion inhibitors and other additives give ECOCOOL R - FERROSTAR extraordinary properties. In addition, the use of special primary amines in ECOCOOL R - FERROSTAR offers good skin compatibility even at high pH values. Free of secondary alkanolamines and alkanolamides.Can be used for all roughing and final finishing operations on cast iron steel.

To optimise service life, the machine should be flushed thoroughly using RENOCLEAN SMC (see separate data sheet) prior to recharging with fresh fluid. As with all modern cutting fluids, concentration control is of paramount importance, therefore regular check by use of a refractometer is recommended for this product. It should be noted that the individual product refractometer correction factor should always be used to ensure accuracy. A comprehensive range of coolant monitoring and maintenance systems are available from FUCHS Lubricants UK, incorporating coolant dispensing, recycling and disposal equipment.


Application  -


ECOCOOL R - FERROSTAR can be used for all roughing and final finishing operations on cast iron steel. For fresh-fill we recommend a water hardness of at least 10°dH.










Recommended Concentrations  -

·         Machining 4 – 10 %
·         Grinding 4 – 5 %





Benefits  -

·         excellent washing effect
·         high emulsion stability
·         excellent corrosion protection
·         low foaming
·         high cutting performance
·         good cooling, wetting and flushing
·         keep machines clean
·         high stability without additives
·         ECOCOOL R – FERROSTAR MB is free of secondary alkanolamines and alkanolamides. It conforms to German TRGS 611


Component Protection  -

Following manufacturing operations Fuchs recommends the use of our fully compatible RENOCLEAN cleaners and ANTICORIT corrosion preventives to clean and protect your components. Please refer to data sheets, or contact your local Fuchs Area Manager to discuss your requirements.








Looking for any other product in FUCHS Lubricants or other Lubricant ? Just give us a call.



Source URL: 
https://www.schmierstoffe-online.com/product/fuchs-ecocool-r-ferrostar-mb/


Email: info@dm-schmierstoffservice.de
Contact No: +49 8106 3978728


Tags:
Fuchs Ecocool R, Fuchs schmierstoffe, Fuchs lubricants, Fuchs lubricant, Fuchs schmierstoff, Fuchs oil, Fuchs motor oil, Fuchs Brake Fluid, Fuchs Fluid

#Lubricants #MotorOil #EngineOil #CrudeOil #Grease #HydraulicOil #SyntheticOil #CarOil #GearOill #Oil #Gas #HydraulicFluid #BrakeFluid #RapeseedOil #TractorOil #CylinderOil #Lubricant #IndustrialLubricants #Fette #MineralOil #TransmissionOil #Petronas #Kluber #Meguin #Castrol


Labels:

Comments

Post a Comment

Popular posts from this blog

ARAL Degol BMB 1200

ARAL Degol BMB 1200 is gear oil type CLPF Recommended Use   - Aral Degol BMB 1200 is a high-performance gear oil with solid lubricant additives (molybdenum disulfide / MoS2). This oil complies with the requirements of DIN 51517-3, and is marked according to DIN 51502 as transmission oil type CLPF. The type and proportion of the MoS2, which is particularly stable, are specially adapted to the base oil and the other additives. Thus, highest efficiency can be achieved over a wide load range. Noteworthy features of this gear oil are in addition to the neutrality towards non-ferrous metals and seals a high thermal stability, good aging resistance and an extremely good corrosion protection. Application   - Aral Degol BMB 1200 is predestined for use in slow-running heavy-duty drives and under heavy shock and vibration loads. It ensures lubrication even if the reaction layers, which have been formed by chemically dissolved active subs...
Post a Comment
Read more

Klüber Hotemp Super N Plus

Klüber Hotemp Super N Plus is a special high-temperature oil for continuous wood panel presses Benefits For Your Application   - – Reduced energy consumption and improved efficiency due to advanced additives, even at very high temperatures – No lacquer-like residues formed under continuous total loss lubrication conditions – Low evaporation losses with reduced oil consumption and fume formation – Good adhesion and spreading properties, minimised contamination risk and effective lubricant supply to all friction points Description   - HOTEMP SUPER N PLUS is a special high-temperature oil for use on the latest generation of continuous board presses subject to highest process temperatures and speeds. HOTEMP SUPER N PLUS is an advanced product based on the HOTEMP…series with further development in terms of evaporation losses at temperatures between 230 and 260 °C. No lacquer-like residues are formed under continuous total loss lubrication condition...
Post a Comment
Read more

Mobil Mobilmet 443

MOBIL MOBILMET 443 is a High Performance Oil-Based Cutting Fluids Product Description   - Mobilmet 440 Series fluids are high performance, multi-service, non-corrosive straight cutting fluids. They are designed for moderate to heave duty cutting operations. They are also suitable for machine tool lubrication and use as hydraulic fluids in specific applications. They are formulated from high quality base oils and chlorine-free additives to provide effective machine performance in a wide variety of moderate to severe operations. They are non-staining to both ferrous and non-ferrous metals during machining. Mobilet 440 Series fluids are formulated to prevent the formation of oil mist in the vicinity of the machine tool, thus contributing to a safer and more pleasant working environment. Features and Benefits   - Mobilmet 440 Series Fluids are designed for a very wide variety of non-corrosive cutting and machining operations that range from moderate ...
Post a Comment
Read more