Skip to main content

Fuchs Anticorit VCI UNI O 40


 


Fuchs Anticorit VCI UNI O 40 Is a mineral oil with VCI properties 

Fuchs Anticorit VCI UNI O 40 is a Vapor phase corrosion preventive


Description  -


FUCHS ANTICORIT VCI UNI O 40 is an amber-coloured VC rust-preventive oil with unique properties. In a closed system it releases the protective VCI-vapours for a long period of time. It is the ideal corrosion preventive for fuel tanks, gear boxes and similar “closed systems”.ANTICORIT VCI UNI O 40 protects iron, steel, copper, brass, bronze and other metals by the vapour
phase. There is no need for direct contact with the metal surface. In most cases, for each cubic meter to be protected, 0.3 – 0.4 l of ANTICORIT VCI UNI O 40 are sufficient.

ANTICORIT VCI UNI 0-40 Rust preventative oil with built in vapour phase corrosion inhibitors for use in closed systems such as fuel tanks, gearboxes.ANTICORIT VCI UNI 0-40 is a rust-preventive oil with unique properties. It contains built in VCI inhibitors. In a closed system it therefore sets free the protective VCI-vapours over a long period of time. It is the ideal rust preventive for fuel tanks, gearboxes and similar “closed systems”.ANTICORIT VCI UNI 0-40 protects iron, steel, copper, brass, bronze and other metals without direct contact with the metal surface by the vapour phase. For each m³ of void space to be protected, only 0.3 – 0.4 litres (300 - 400 mL) of ANTICORIT VCI UNI 0-40 is needed.ANTICORIT VCI UNI 0-40 is an oil concentrate, which is miscible with gasoline, oil and diesel. It burns without forming ash, therefore it is not necessary to remove the ANTICORIT VCI UNI O 40 when starting up the equipment. ANTICORIT VCI UNI 0-40 can be removed with white spirit or alkaline cleaners.



Application  -


ANTICORIT VCI UNI O 40 is a VCI corrosion prevention oil (concentrate) which is miscible with gasoline,mineral and synthetic oils and diesel. It burns without forming ashes, therefore it is typically not necessary to remove the ANTICORIT VCI UNI O 40 when the tanks/gears are used again. It is not recommended to apply the product directly on the metal surface to make on oil layer. Its corrosion inhibitors are evaporating and protect the parts through the vapour phase.

Exceeds the requirements of TRGS 615 because it completely dispenses with the use of nitrite and secondary amines Storage conditions ANTICORIT VCI UNI O 40 is in its original sealed container at temperatures of + 5 ° C to + 40 ° C ° C storable for up to 12 months. The issue of a guarantee of durability is not connected with the specification of the minimum storage period.



Benefits  -



·         Contains VCI inhibitors
·         For iron, steel, copper, brass, bronze, aluminium etc.
·         Free of nitrite and barium
·         Extremely efficient
·         Compatible with most mineral and synthetic oils
·         Can be used as concentrate
·         Very efficient
·         Simple application and dosage
·         Corrosion protection can be adapted to different requirements by means of variable dosing
·         Particularly economical due to the absence of carrier material. The use of reusable containers eliminates the procurement and disposal of VCI packaging materials










Storage Conditions  -


If sealed in the original container ANTICORIT VCI UNI O 40 can be stored up to 12 months at temperatures between + 5 °C and + 40 °C.




Looking for any other product in FUCHS Lubricants or other Lubricant ? Just give us a call.


Source URL: 
https://www.schmierstoffe-online.com/product/fuchs-anticorit-vci-uni-o-40/


Email: info@dm-schmierstoffservice.de
Contact No: +49 8106 3978728


Tags:
Fuchs Anticorit VCI UNI O 40, Fuchs schmierstoffe, Fuchs lubricants, Fuchs lubricant, Fuchs schmierstoff, Fuchs oil, Fuchs motor oil, Fuchs Brake Fluid, Fuchs Fluid

#Lubricants #MotorOil #EngineOil #CrudeOil #Grease #HydraulicOil #SyntheticOil #CarOil #GearOill #Oil #Gas #HydraulicFluid #BrakeFluid #RapeseedOil #TractorOil #CylinderOil #Lubricant #IndustrialLubricants #Fette #MineralOil #TransmissionOil #Petronas #Kluber #Meguin #Castrol


Labels:

Comments

Post a Comment

Popular posts from this blog

ARAL Degol BMB 1200

ARAL Degol BMB 1200 is gear oil type CLPF Recommended Use   - Aral Degol BMB 1200 is a high-performance gear oil with solid lubricant additives (molybdenum disulfide / MoS2). This oil complies with the requirements of DIN 51517-3, and is marked according to DIN 51502 as transmission oil type CLPF. The type and proportion of the MoS2, which is particularly stable, are specially adapted to the base oil and the other additives. Thus, highest efficiency can be achieved over a wide load range. Noteworthy features of this gear oil are in addition to the neutrality towards non-ferrous metals and seals a high thermal stability, good aging resistance and an extremely good corrosion protection. Application   - Aral Degol BMB 1200 is predestined for use in slow-running heavy-duty drives and under heavy shock and vibration loads. It ensures lubrication even if the reaction layers, which have been formed by chemically dissolved active subs...
Post a Comment
Read more

Klüber Hotemp Super N Plus

Klüber Hotemp Super N Plus is a special high-temperature oil for continuous wood panel presses Benefits For Your Application   - – Reduced energy consumption and improved efficiency due to advanced additives, even at very high temperatures – No lacquer-like residues formed under continuous total loss lubrication conditions – Low evaporation losses with reduced oil consumption and fume formation – Good adhesion and spreading properties, minimised contamination risk and effective lubricant supply to all friction points Description   - HOTEMP SUPER N PLUS is a special high-temperature oil for use on the latest generation of continuous board presses subject to highest process temperatures and speeds. HOTEMP SUPER N PLUS is an advanced product based on the HOTEMP…series with further development in terms of evaporation losses at temperatures between 230 and 260 °C. No lacquer-like residues are formed under continuous total loss lubrication condition...
Post a Comment
Read more

Mobil Mobilmet 443

MOBIL MOBILMET 443 is a High Performance Oil-Based Cutting Fluids Product Description   - Mobilmet 440 Series fluids are high performance, multi-service, non-corrosive straight cutting fluids. They are designed for moderate to heave duty cutting operations. They are also suitable for machine tool lubrication and use as hydraulic fluids in specific applications. They are formulated from high quality base oils and chlorine-free additives to provide effective machine performance in a wide variety of moderate to severe operations. They are non-staining to both ferrous and non-ferrous metals during machining. Mobilet 440 Series fluids are formulated to prevent the formation of oil mist in the vicinity of the machine tool, thus contributing to a safer and more pleasant working environment. Features and Benefits   - Mobilmet 440 Series Fluids are designed for a very wide variety of non-corrosive cutting and machining operations that range from moderate ...
Post a Comment
Read more